Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.
Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.
Visualizza gli articoli presentati alla COMSOL Conference 2025
The project was ordered by a Swiss watchmaker. The aim was to modelize and optimize the acoustic of a minute repeater on one of the high range item made by the watchmaker. Therefore we based our work on a simplified geometry made by Creo. The mesh model includes the gongs, the bottom ... Per saperne di più
Metamaterials have become a very hot topic in scientific publications, especially in Acoustics. In 2018, nearly 3,000 publications can be already found about acoustic metamaterials (source: Google Scholar). But how many industrial applications? Not that much because they are often ... Per saperne di più
The reduction of NOx emissions in combustion systems like domestic boilers, gas turbine combustors, industrial burners, etc., can be achieved by using lean premixed combustion technologies. One of the major concerns in the operability of such systems is their susceptibility to ... Per saperne di più
Modeling the acoustic output of wind turbines presents extreme simulation challenge due to the geometry of rotors and towers requiring very large mesh size with large volumes of empty space between blades. In this paper, the structural-acoustic finite element models that were previously ... Per saperne di più
Introduction In this study, we investigate the damping mechanisms of particle resonances in acoustofluidic systems using the finite element framework of COMSOLTM. In the field of acoustic micro-manipulation, pressure waves are used for the contactless handling of micro-meter sized ... Per saperne di più
An important yet rarely explored problem in room acoustics is how to correlate the decay times of modal resonances to the acoustic properties of the boundaries (walls). The room response is often described by reverberation times, but the reverberation model breaks down at low frequency, ... Per saperne di più
KVADRAT SOFTCELLS A/S, COMSOL A/S AND RESOLVENT P/S APPLICATION CREATED BY RESOLVENT FOR SIMULATING ABSORPTION CURVES ON ACOUSTIC PANELS WITH FRONT TEXTILES AND ACOUSTIC INSULATION FOLLOWING THE INTERNATIONAL STANDARD ISO 354 FOR MEASURING SOUND ABSORPTION. In Kvadrat Soft Cells we ... Per saperne di più
High frequency ultrasound (100-1000 MHz) has been used in microscopy since the 1970s. The main imaging component, the acoustic lens, is commercially available. The resolution, working distance, and focal length depend on the structure of a lens, which is unique for each produced lens. ... Per saperne di più
The recent introduction of acoustic metamaterials and metasurfaces in the literature has triggered an tremendous interest in the scientific community, with their capability to achieve extraordinary acoustic properties for various acoustic and noise control applications, although limited ... Per saperne di più
Invented at the end of the XIXth century, the electrodynamic loudspeaker has not much changed since then. Although the materials have greatly evolved, the geometry and the transduction principle have remained the same. However, in many applications, the bulkiness of the driver behind the ... Per saperne di più
