Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Simulation of Acoustic Wave-Structure Interaction in a Quarter Wavelength Tube Energy Harvester
An acoustic energy harvesting system at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside of a quarter-wavelength straight-tube resonator has previously been studied using COMSOL and verified experimentally. When an incident ... Per saperne di più
RF NEMS Magnetoelectric Sensor Simulation and Demonstration
RF NEMS Magnetoelectric (ME) Sensor with a ferromagnetic (FeGaB)/ piezoelectric (AlN) thin film heterostructure is simulated, fabricated and measured in this work. To analyze the response of the ME structures, the coupling between the magnetic, elastic and electric field in the two ... Per saperne di più
Thermoviscous Acoustics – Piezoelectric Modeling and Simulation of Surface Acoustic Wave Devices
New drug discovery and development is costly; of all compounds investigated for use in humans, only a small fraction is approved for treatments around the world. The pharmaceutical industry has started switching from molecular drugs to protein-based drugs due to high specificity, ... Per saperne di più
Modeling, Simulation, and Optimization of Piezoelectric Bimorph Transducer for Broadband Vibration Energy Harvesting in Multi-Beam and Trapezoidal Approach
The objective of the research is to design a broadband energy harvester device through the multi-beam approach and non-linear trapezoidal geometry approach. The performance of two piezoelectric PZT-PZN polycrystalline ceramic composition samples are simulated in COMSOL Multiphysics®, and ... Per saperne di più
Time Domain Construction of Acoustic Scattering by Elastic Targets Through Finite Element Analysis
Finite element models for acoustic scattering from three dimensional underwater elastic objects, calculated in the frequency domain, are transformed to the time domain through Fourier synthesis using COMSOL Multiphysics®. The time domain mirrors the way in which experimental scattering ... Per saperne di più
Numerical Modeling and Verification of Acoustic Streaming Induced by Ultrasonic Treatment
Acoustic streaming (AS) describes a physical phenomenon where an oscillating sound emitter induces a steady fluid motion. Metal processing industry applies this treatment for grain morphology adjustments during the solidification of metal. Improvement and further development of this ... Per saperne di più
Analysis of High-Frequency Thermoacoustic Instabilities in Lean, Premixed Gas Turbine Combustors
Modern gas turbine systems for power generation are prone develop so-called thermosacoustic instabilities in the combustion chamber. Physically, these instabilities emerge as large amplitude pressure oscillations within the combustor, which are caused by constructive feedback ... Per saperne di più
Lumped Element Multimode Modeling of Balanced-armature Receiver with COMSOL Multiphysics® Software
For the lack of higher order modes, lumped element (LE) models currently used may be insufficient to predict the system of balanced-armature receiver (BAR). We develop a LE multimode model for BAR in the frequency domain based on the techniques of mode decomposition, truncation, and ... Per saperne di più
A FEM Study of Displacement Sensor Based on Magnetostrictive/Piezoelectric Composite Material
This paper studies the application of laminate magnetoelectric (ME) material in displacement sensor. We studied the L-L block composite thanks to designed structure by coupling displacement signal with the displacement potential of ME composite. A nonlinear approximation is adapted to ... Per saperne di più
Design and Simulation of Capacitive Pressure Sensor for Condition Monitoring
This poster focuses on the development of a capacitive pressure sensor for condition monitoring applications. One method to measure vibrations is to mount an pressure sensor on the vibrating machinery or object and measure the pressure exerted due to vibrations. Measured pressure level ... Per saperne di più