In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.

Evaluation of Performance of Enzymatic Biofuel Cells with Microelectrode Arrays Inside a Blood Artery via Finite Element Approach

C. Wang[1], Y. Song[1]
[1]Florida International University, Miami, FL, USA

Enzymatic biofuel cells (EBFCs) are considered as a promising candidate for powering miniature implantable devices. In order to predict the performance in the human blood artery, we simulated a 3D EBFC chip with highly dense micro-electrode arrays. In this simulation using COMSOL Multiphysics®, we applied the 1) Michaelis Menten equation; 2) Nernst potential equation; 3) Navier Strokes velocity, ...

Optimal Design of Flow Distributors for Detecting Blocked Microreactors

Osamu TONOMURA[1]
[1]Kyoto University, Kyoto, Kyoto, Japan

When the production capacity of micro chemical plants is increased by numbering-up approach, it is important to realize the uniform flow distribution among the parallelized microreactors. In addition, a blocked microreactor needs to be identified as early as possible to achieve the stable long-term operation of micro chemical plants. In this research, a system that can detect a blocked reactor ...

Analysis of Optical Manipulation of a Metallic Nanowire using COMSOL Multiphysics®

Ryota OZAWA et al.[1]

[1]Yokohama National University, Yokohama, Kanagawa, Japan

We have developed optically driven micropumps by manipulating microstructures using optical tweezers. In this study, we proposed and developed a novel manipulation method of a single metallic nanowire. In this method, dynamic optical vortex is used not only for manipulating a metallic nanowire in the focal plane, but also for grasping it along the optical axis. This method will be used for ...

Permeability in Fragmented Materials and its Application to Underground Mining

S. Palma [1], R. Castro [1], A. Hekmat [1],
[1] Mining Engineering Department, Block Caving Laboratory, University of Chile, Santiago, Chile

The block caving mine is considered by the mining industry as one of the natural replacements of the current open cut mines in the near future. The block caving technique is based on the extraction of small broken rocks, created by blasted initially large solid rocks, and the fracture of compact material located in the upper layers because the stress propagation generated by the extraction ...

Investigation of Thermal and Mechanical Factors on Distance Sensors in a Tow Bar

C. Mallwitz [1], L. Fromme [1], B. Sielhorst [2],
[1] University of Applied Sciences Bielefeld, Department of Engineering Sciences and Mathematics, Bielefeld, Germany
[2] Westfalia-Automotive GmbH, Rheda-Wiedenbrück, Germany

Most technical systems become smart over time, therefore those systems will have improved safety and comfort functions. An example is a new development by Westfalia-Automotive. A new generation of smart tow bars, equipped with a sensor system, including distance sensors, is able to inform the driver of a car with a connected trailer about vertical and trailing loads. This helps to ensure a ...

Localization of Chemical Sources Using Stochastic Differential Equations in Realistic Environments

A. Mohammed, and A. Jeremic
McMaster University, Hamilton, L8S4K1, Canada

Signal processing algorithms for chemical sensing/monitoring have been subject of considerable research interest in the recent years mainly due to their diverse applicability. When the concentration of chemical agent is small, the dispersion of particles is governed by stochastic differential equations describing more complex motion mechanisms such as Brownian motion. In this paper we propose ...

Benchmarking as Key Element of Confidence Building in Safety Assessments for Radioactive Waste Disposal

E. Weetjens
SCK-CEN (the Belgian Nuclear Research Centre), Mol, Belgium

Verification of the codes applied for assessment of the long-term repository safety is typically one of the quality assurance requirements demanded by regulatory bodies, in the disposal of radioactive waste. In this paper, an internationally organized benchmark exercise is presented, in which the comparison was carried out for a selection of key radionuclides. The examples presented in this ...

Viscous damping of a periodic perforated MEMS microstructure when the Reynolds’ equation cannot be applied: Numerical simulations

D. Homentcovschi[1], and R.N. Miles[1]
[1]Department of Mechanical Engineering, SUNY Binghamton, NY

This paper develops a computational model for determining the total damping coefficient for a unit cell of a MEMS microscale device containing a repetitive pattern of holes. The basic cell of the microstructure is approximated by an axi-symmetric domain and the velocity and pressure fields are determined from solutions of the Navier-Stokes equations using the finite element software package ...

Analyzing the Influence of Electric Field on Flame Through  Electro-Hydrodynamics

S. Mitra[1], P. Sharma[2], M. Godbole[2], and M. Kumar KM[2]
[1] Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, Tamil Nadu, India

[2] GE Global Research, Bangalore, Karnataka, India

The effects of electric fields on combustion flames have been studied by using several types of experimental techniques as well as few numerical methods. The flame is influenced by the electric field mainly due to the charges present as a result of chemical reactions that take place in the flame. From earlier experiments it was established that the electrical power required to do so is very less ...

Blistering of Industrial Floors on Concrete Substrate: The Role of Air Overpressure

P. Devillers[1], S.V. Aher[2], G. Fau[3], B. Tranain[3], and C. Buisson[1]
[1]Centre des Matériaux de Grande Diffusion, Ecole des Mines d’Alès, France
[2]Department of Civil Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, India
[3]Centre Scientifique et Technique du Bâtiment, Champs sur Marne, France

A three dimensional COMSOL Multiphysics, transient analysis, diffusion model has been adopted to model the transfers of water in the industrial concrete floors. To take into account the different initial saturation levels at the different levels of the slab, the model is divided into three subdomains. The rise of the waterfront is also simulated and the air overpressure thereby developed at the ...