Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Please help me

Please login with a confirmed email address before reporting spam

Hi to all,
Please help me.I am doing heat transfer simulation in laser tube forming field. My distribution is guassian. i have used following conditions to beam rotate 180 degree on over the tube(top surface). I have moved the heat source by using cylindrical co-ordinates. I have used only GUI method.
My model radius 10[mm]
To Circular movement,
Y=R*cos(omega*t)
Z=R*cos(omega*t)
X=L/2
Analytic function is,
exp(-(r/rb)^2)
boundary Heat source is
(0.865*Ab*P/(pi*rb*rb))*an1(sys2.r[1/m])
My question is,
I want to increase the number of laser passes (only 180 deg)
Now I have done only one pass on the tube.
I am interesting to move the laser heat source on tube at many times (GUI method) (2, 3, 4 etc.)
I tried many times. But I couldn’t do it.
Please help me anyone…
Thanking you
Jay

0 Replies Last Post 8 mag 2012, 07:44 GMT-4
COMSOL Moderator

Hello Jaykumar Dije

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.