Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Unit issue

Posted 7 apr 2011, 11:30 GMT-4 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.1 1 Reply

Sansiri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I define some parameters with their associated unit, i.e. Plank's constant. Then, when I use those parameters to calculate other parameters. I found that some time the unit of the derived parameter is incorrect. Most of them have something to do with Plank's constant.

Please see the attached image for an example.

Attachments:

1 Reply Last Post 7 apr 2011, 11:45 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 apr 2011, 11:45 GMT-4
I suspect the problem has to do with the fact that h is already used by COMSOL for the element size.
Try using another name.
I suspect the problem has to do with the fact that h is already used by COMSOL for the element size. Try using another name.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content