Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Increase number of sides in a circle

Morten Wollert Nygren

Please login with a confirmed email address before reporting spam

In comsol the circle is represented as a polygon with 64 (?) sides, is there any way to increase this number?

3 Replies Last Post 26 nov 2010, 03:04 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 nov 2010, 15:17 GMT-5
Hi

is it the graphics rendering or the neshed geometry ?
for the graphics there are some options settings in the prefereces (at different places in 3.5 and in the new v4)
for the mesh its in the meshing parametes, either the default to be set to finer or more, or by tweeking the custom settings

--
Good luck
Ivar
Hi is it the graphics rendering or the neshed geometry ? for the graphics there are some options settings in the prefereces (at different places in 3.5 and in the new v4) for the mesh its in the meshing parametes, either the default to be set to finer or more, or by tweeking the custom settings -- Good luck Ivar

Morten Wollert Nygren

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 nov 2010, 16:01 GMT-5
It is in the graphics rendering, and I found the option you refered to.

Thank you!
It is in the graphics rendering, and I found the option you refered to. Thank you!

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 nov 2010, 03:04 GMT-5
Hei

Ja, (nesten) alt hjemmer seg derinne, det er bare hvor ?

--
Good luck
Ivar
Hei Ja, (nesten) alt hjemmer seg derinne, det er bare hvor ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.