Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Microwave heating for CO_2 desorption provides fast, low-temperature desorption, lowering energy requirements in carbon capture. According to studies, microwaves generate selective heating, dramatically increasing desorption rates compared to traditional approaches. This new technique ... Per saperne di più
Power-to-gas is an important area of research for reducing greenhouse gases and seasonal energy storage. Methane, with a Lower Heating Value of 50 MJ/kg, is already a commonly used gas, and its synthesis using green hydrogen production (electrolysis of renewable energy) is a remarkable ... Per saperne di più
A well-designed isothermal laminar flow tubular reactor (LFTR) can be used as a source of high-quality kinetic rate data provided conditions are such that the plug flow idealization can be applied to its performance. In practice, meeting the necessary criteria for constant temperature ... Per saperne di più
An electrically heated fixed bed (19 mm diameter, 200 mm length) is investigated regarding its electrical conductivity. Various electrically conductive activated carbons are used. The fixed bed is constructed from activated carbon pellets and/or activated carbon fabric. Electrical ... Per saperne di più
Increasing energy demands in society have led to intensive fossil fuel usage, resulting in increasing carbon dioxide (CO2) emissions, one of the most significant greenhouse gases and major contributors to global warming. Considerable efforts have been made towards CO2 capture, storage, ... Per saperne di più
The "Power to Gas" technology is a promising alternative for storing renewable electrical energy through energy carriers. This technology involves using surplus energy from renewable sources to obtain green hydrogen through water electrolysis. Since hydrogen storage and transportation ... Per saperne di più
Figure 1 shows a simplified scheme of a typical industrial steam methane reforming (SMR) reactor, which is a top-fired, packed-bed multi-tubular chemical reactor, consisting of a series of catalytic tubes arranged within a furnace. The tubes contain two adjacent catalytic sections filled ... Per saperne di più
Ongoing engineering design studies at Oak Ridge National Laboratory are exploring the feasibility of converting the High Flux Isotope Reactor (HFIR) from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel. HFIR is a pressurized light water-cooled and moderated research ... Per saperne di più
Ultrasonic flow-cell reactors are used for many industrial applications, where fluid substrate is sonicated in a small region, where very high ultrasonic acoustic power is present. The electromechanical transducer (converter) that drive the sonotrode inside the flow-cell is designed in ... Per saperne di più
The transition to sustainable production includes the reduction of fossil material usage. Vegetable oil can be used as a reagent to form polyurethane by epoxidation through three major reaction steps, epoxidation, carbonation, and aminolysis. Many attempts have been made to model these ... Per saperne di più