Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
COMSOL Modelling of a Planar Micro Ion Mobility Spectrometer
A micro Planar Ion Mobility Spectrometer (P-FAIMS) has been simulated using multiphysics software. In P-FAIMS target ions are discriminated by the application of the proper separation voltages to the electrodes of the system. Modelling of vapour phase ions of two compounds have been ... Per saperne di più
Simulation Of A Hydrogen Permeation Test On A Multilayer Membrane
To understand a metal susceptibility to Hydrogen Embrittlement (HE), it is important to quantify the diffusion of hydrogen through a metallic membrane. Electrochemical permeation tests are the most common methods for experimentally determining the diffusion coefficient of a metal. ... Per saperne di più
Modeling Phase Separation of Toluene-water in a Horizontal Settler
The mixer-settler principle is commonly used for industrial extraction processes. This is done by mixing the two immiscible liquids to perform mass transfer and subsequently separating them in gravity settler. However, when drop size becomes small, separation in a settler becomes ... Per saperne di più
Combustion Of Kerosene-Air Mixtures In A Closed Vessel
The aim of this work is to present a simple multiphysics simulation using COMSOL able to describe combustion of kerosene vapours in a closed vessel. The emphasis is on the mechanical effects of the reactive processes. The evolution of the thermodynamical variables (pressure, temperature, ... Per saperne di più
Modeling Of A Strongly Coupled Thermal, Hydraulic And Chemical Problem: Drying And Low-Temperature Pyrolysis Of Chromated Copper Arsenate (CCA)-Wood Waste Particles In A Moving Bed Reactor
Low temperature thermal carbonisation might be the ultimate solution to the growing disposal problem of CopperChromeArsenic-treated waste wood. This energy and material recuperating technology is currently in the process of upscaling to an industrial level. In the present study, a ... Per saperne di più
Solid State Transport of Reactive Charged Particles: Application to Metal Oxidation
This paper studies multicomponent transport through zirconia, assuming a chemical reaction involving electrons and oxygen vacancies defects. Classically, according to the Wagner theory for ambipolar diffusion, the electroneutrality condition in the oxide is considered. Therefore three ... Per saperne di più
Optimisation Of Filament Geometry For Gas Sensor Application
Monitoring of indoor CO2 concentration is of particular interest to detect room occupancy in order to optimise power consumptions of building. One technological approach is to use optical detection using specific absorption lines of CO2 molecules in the infrared domain close to 4.2 &mu ... Per saperne di più
Modeling and Simulation of a Thermal Swing Adsorption Process for CO2 Capture and Recovery
The present study deals with a twodimensional modeling and simulation of a thermal swing adsorption (TSA) process used for the capture of CO2 from CO2/N2 mixture. The models are described by partial differential equations (PDEs) including conservation equations, models for equation of ... Per saperne di più
Flow Simulation In A Submerged Membrane Bioreactor At Laboratory Scale
Submerged membrane bioreactor (SMBR) is an efficient technology for wastewater treatment that combines biological process and membrane filtration in one single stage. In the most usual configuration, submerged membrane hollow fibers are set in several planes. Air is introduced from the ... Per saperne di più
Modeling of Transport Phenomena during Hydrogen Uptake in an Alanate Storage System Equipped With Metallic Honeycomb Heat Exchanger
In this paper, a metallic honeycomb structure is used as a heat exchanger in order to improve the hydrogen refuelling time for an alanate storage system. Using COMSOL software, the heat exchanger structure and the hydride bed are modeled as a two separate media and the governing ... Per saperne di più