Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
High-resolution imaging is useful in oil and gas exploration to identify producing fractures that can be in the millimeter thickness range. In principle, high-resolution imaging maybe achieved using “current injection” to measure the electrical conductivity of the formation. Two current ... Per saperne di più
Vortex-induced vibration is a major cause of fatigue failure in submarine oil and gas pipelines and steel catenary risers. Even moderate currents can induce vortex shedding. In this paper, COMSOL Multiphysics is applied to study the flow pattern around submarine pipeline spans, and ... Per saperne di più
Mutually soluble-solvents can improve the ultimate recovery in conventional reservoirs. Initially, the solvent moves with the imbibing aqueous phase into the reservoir. However, upon contact with oil, diffusion occurs and the solvent is transported in the oleic phase. Through the ... Per saperne di più
In-situ electrical heating technologies are among the most recent technologies used for bitumen recovery from tar sand and oil shale. These technologies have limited environmental impact because there is little disturbance of the land, and water and solvents are not used. Two-phase ... Per saperne di più
Working fluids (engine oil, transmission fluid, hydraulic fluid, coolants, etc.) become contaminated in use. To ensure that the equipment is not damaged by the contaminated fluid, the fluid is typically removed and replaced periodically. For large groups of machines, the used fluid is ... Per saperne di più
Using a 1-D model of polymer displacement, we analyze the exergy (maximum attainable work) balance of viscosifi ed water, e.g. with Arabic gum. The 1-D model shows the principle how such an analysis can be done. A comparison as to the displacement efficiency is made between three ... Per saperne di più
Study of interaction of drops and bubbles with electric field is important for understanding the physics involved in various physical phenomenas and industrial processes. Important applications arise in colloidal systems (Miller and Scriven, 1970), meteorology and cloud physics (Sartor, ... Per saperne di più
Sedimentation is a challenging two-phase problem to model and simulate. Many applications in the industry use sedimentation for separation. For example treatment of wastewater often carried out in settling basins. Different types of the sedimentation process include independent and zone ... Per saperne di più
The transition to sustainable production includes the reduction of fossil material usage. Vegetable oil can be used as a reagent to form polyurethane by epoxidation through three major reaction steps, epoxidation, carbonation, and aminolysis. Many attempts have been made to model these ... Per saperne di più
ABSTRACT: Over the years, the most common method of preventing scale formation and blockage of formation pores in oil and gas systems is by squeezing of chemicals into the formation. Different experimental and simulation studies have been carried out to understand the interaction of the ... Per saperne di più