See How Multiphysics Simulation Is Used in Research and Development

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
View the COMSOL Conference 2019 Collection

Kinetics and Reactor Modeling of Methanol Synthesis from Synthesis Gas

H. Bakhtiary, F. Hayer, H. Venvik, A. Holmen
Norwegian University of Science and Technology Trondheim

Methanol synthesis is a typical reaction in heterogeneous catalysis. In this work, we have studied a laboratory fixed-bed reactor packed with a Cu/Zn/Al2O3 catalyst in both adiabatic and isothermal tubular operational modes. A methanol synthesis kinetic model was implemented in COMSOL ... Per saperne di più

Extraction of Phenolic Compound from Grape Fruit. A Comparison Between a 3D FEM Model and Experimental Results

E. Madieta, I. Zouid, R. Siret, and F. Jourjon
Laboratoire GRAPPE, ESA, Angers, France

Fresh fruits and vegetables are gaining importance in the human diet because they contain many beneficial compounds. Among these compounds, phenols are of vital importance due to their antioxidant properties. It is well evident from previous researches that the skin of red grapes is ... Per saperne di più

Modeling of the Transport Phenomena in Lithium-Ion Battery Electrolytes

A. Nyman, M. Behm, and G. Lindbergh
Applied Electrochemistry, School of Chemical Science and Engineering, Royal Institute of Technology Stockholm, Sweden

Modeling of mass transport is an important step in evaluating lithium-ion battery electrolytes and understanding cell performance. For high-power applications, concentration gradients in the electrolyte lead to limiting currents, which limit the power-density of the battery. The model ... Per saperne di più

Image Based Mesh Generation for Realistic Simulation of the Transcranial Current Stimulation

R. Said[1], R. Cotton[1], P. Young[1], A. Datta[2] , M. Elwassif[2], and M. Bikson[2]
[1]Simpleware Ltd, Exeter, UK
[2]Department of Biomedical Eng, The City College of New York, USA

Electrical stimulation of the brain involves the application of currents delivered through scalp electrodes to modulate brain activity, known as Transcranial Current Stimulation (TCS). A critical factor for TCS efficacy and safety is the “spatial focality” of induced neuronal modulation. ... Per saperne di più

Designing the Actuator for the Next-Generation Astronomical Deformable Mirrors: a Multidisciplinary and Multiphysics Approach

C. Del Vecchio[1], R. Biasi[2] , D. Gallieni[3], and A. Riccardi[1]

[1]INAF-OAA, Fierenze, Italy
[2]Microgate Srl, Bolzano, Italy
[3]ADS International Srl, Valmadrera, Italy

The actuation system of the deformable mirror is one of the crucial components of an Adaptive Optics unit. One possible implementation comprehends a linear force motor and a capacitive sensor providing the feedback measure signal. Choosing a magnetic circuit that makes optimum use of the ... Per saperne di più

Atmospheric Icing of Transmission Line Conductor Bundles

T. Wagner[1], and U. Peil[2]
[1]International Graduate School of Risk Management of Natural and Civilization Hazards on Buildings and Infrastructure, Braunschweig, Germany
[2]Institute of Steel Structures, Technical University Braunschweig, Braunschweig, Germany

Hazardous for the transmission lines is not only the static ice load, but also the aerodynamic instability of iced cables. It can lead to large amplitude oscillations at low frequencies. Also,  twisting due to asymmetrical iced cables may increase the fatigue rate. In extreme events, ... Per saperne di più

Dynamic Simulation of Electromagnets

Harald Biller
Continental Automotive Systems, Frankfurt, Germany

Harald Biller studied mathematics and physics at Darmstadt, London, and Würzburg. In 1999, he received his PhD from Stuttgart University, specializing in functional analysis, topology, and Lie theory. He worked as a lecturer at Darmstadt University until 2004, when he became a ... Per saperne di più

Highest Pulsed Magnetic Fields in Science and Technology, Assisted by Advanced Finite-Element Simulation

Thomas Herrmannsdörfer

Forschungszentrum Dresden-Rossendorf, Germany

Thomas Herrmannsdörfer got his PhD in experimental physics from the University of Bayreuth in 1994. In 1995, he received the Research Award of the Emil-Warburg-Foundation while he worked at the DFG-Graduiertenkolleg Bayreuth. From 1995 – 1998 he worked as a scientist at Hahn-Meitner ... Per saperne di più

Comparison between COMSOL and RFSP-IST for a 2-D Benchmark Problem

G. Gomes
Atomic Energy of Canada Limited, Mississauga, Ontario, Canada

RFSP-IST (Reactor Fueling Simulation Program) is a computer code used for the full-core neutronics design and analysis of CANDU® reactors. RFSP-IST calculates the static flux and power distributions in the core by solving the neutron diffusion equation in two energy groups. For ... Per saperne di più

Simulation of the Dynamic Behavior of a Droplet on a Structured Surface using the Non-conservative Level Set Method

N. Boufercha, J. Sägebarth, and H. Sandmaier
Universität Stuttgart / IFF-MST, Stuttgart, Germany

The ongoing trend towards miniaturization, higher integration as well as cost efficiency will make it necessary to investigate a new assembly method for micro components. In this paper, a novel method of fluidic-based micro assembly is presented. A self-assembly effect which is caused by ... Per saperne di più