Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Introduction: This work presents the design of a novel flow cell based miniaturized electrochemical respirometer to monitor organic content in water samples semi-continuously, in contrast to current Biochemical Oxygen Demand, BOD, methods. Simulation techniques has been used to ... Per saperne di più
This paper presents the results of modeling of a microreactor with three inputs geometry (or crow's-feet), in relation to distributions of velocities and concentrations. The objective of this work is the study of this kind of geometry with relation to fluid dynamics behavior, improving ... Per saperne di più
For the numeric investigations of the high temperature compact heat exchanger two numeric models with and without the regards of the velocity field development were used. The results of the comparison of the numeric and experimental data confirm the necessity of regarding the velocity ... Per saperne di più
Turgor pressure loss and pectin degradation result in texture loss during cooking of plant based materials. To simulate texture loss, a simultaneous heat and moisture transfer, pectin degradation in the cell wall material and solid mechanical model was developed at the microscale using ... Per saperne di più
The "Lithic Hypar" research is based on the mechanical analysis of an innovative reinforced stone's structure, architecturally designed by Prof. Fallacara, University of Bari (Italy): the headquarters entrance portal of the French company SNBR (Société Nouvelle Batiment Régional) located ... Per saperne di più
The use of high-resolution topography in the finite element model demonstrates that deformation from a shallow pressure source can be dramatically affected by overlying relief, not only in magnitude, but also in azimuth. This result is significant as it allows traditionally anomalous ... Per saperne di più
Uterine contractions during pregnancy are currently poorly understood – experts disagree on the mechanisms by which contractions propagate through the organ and the structural layout of the uterine muscle fibers. We have developed a multi-scale model of the uterus, at the cellular, ... Per saperne di più
The system in this study is a closed server filled with Novac dielectric cooling liquid. The aim of this study is to find out the optimum value of the fin height and the cold lid height in order to reduce CPU temperature. A mesh accuracy investigation was conducted. The model set up in ... Per saperne di più
This paper report on a study of the hydrodynamics of skimboards and surfboards using the computational fluid dynamics (CFD) module in COMSOL. The study analyzes the flow in a thin water layer underneath a skim board in a 2-D Cartesian coordinate. Three different sets of boundary ... Per saperne di più
We demonstrate cartogram construction, where a geographical map is distorted to represent some measure, for example population, while trying to keep the shape of regions recognizable. We then apply this cartogram construction technique to optimize thermocouple locations. A heat ... Per saperne di più