Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Simulation of laser processes are more and more efficient. In some cases, as welding and additive manufacturing, the physical phenomena are complex, multi-physics and multi-phases, thus some assumptions have to be done. For Laser Powder Bed Fusion, a laser beam melts and vaporizes the ... Per saperne di più
The thermal load on the system components is one of the technical problems in the development of microfocus X-ray tubes. To improve their stability in long-term use, it is important to understand the physical phenomena and their influence on the system stability and filament lifetime. To ... Per saperne di più
Baking is a central production step in the industrial production of edible wafers and waffles. The initially liquid batter is heated with a pair of metallic baking plates. Establishing a uniform and accurate temperature at the baking face (inner baking plate surface) is crucial for ... Per saperne di più
In regular biosensors, the detected bacteria have to be in drawn towards the sensing area. To increase the sensitivity of the biosensors, bacteria should be drawn towards the sensing area, which can be achieved by dielectrophoresis (DEP). DEP is a mechanism which is used to move ... Per saperne di più
Continuous Ink Jet (CIJ) printing technologies are widely used in the field of industrial coding and marking. These technologies are based on the emission of a high-speed jet of ink droplets (20 m/s) onto the surface of a moving medium. To maintain sufficient print quality, it is ... Per saperne di più
Overview We successfully simulated a template iontronic system for closed-loop neuromodulation and neurosensing. The model’s goal is to support the careful design of novel platforms for in-vitro micro-electrode-array sensors coupled to conductive polymer-based (CP) ionic actuators used ... Per saperne di più
Metasurface (MTS) antennas are based on the use of special types of scattering surfaces patterned at a sub-wavelength scale with electrically small metallic dielectric inclusions, usually called unit cells [O. Quevedo-Teruel et al., Journal of Optics, vol. 21, 2019]. The radiation ... Per saperne di più
The wide bandgap semiconductor silicon carbide (SiC) has drawn increasing attention in recent years as a promising material for high-power, high-frequency, and high-temperature operating devices. These outstanding properties of SiC make it a good candidate to replace silicon in many ... Per saperne di più
Plasma, a complex fluid consisting of electrons, ions, neutrals, and excited species, exhibits both fluid-like behavior and electrical conductivity due to the presence of charge carriers. Consequently, computational modeling of plasma requires the integration of fluid and electrical ... Per saperne di più
In the framework of the EURAMET project 16NRM05, a novel ionization gauge was developed. The goal was to develop a more stable ionization gauge that could be suitable for standardization. The AC/DC Module and the Particle Tracing Module in COMSOL® have been used to design and model the ... Per saperne di più
