Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Laser-induced photovoltage in ferromagnetic thin films is often explained by magneto-thermoelectric effects such as the anomalous Nernst effect (ANE). ANE appears when thermal gradients interact with magnetization. While power loss in flat films can be estimated analytically, numerical ... Per saperne di più
This work presents a comprehensive modeling and validation study of MEMS-based infrared (IR) emitter chips using a neural network-assisted inverse modeling approach in COMSOL Multiphysics. Starting from a single baseline chip geometry, a simulation model was developed that captures the ... Per saperne di più
This work addresses the critical challenge of accurately determining the inner states of three-phase electric smelting furnaces, commonly used in ferro-alloy and silicon production. Gaining insights into these internal states is crucial for optimizing furnace performance, energy ... Per saperne di più
Successive studies on graphene, reactive-edge graphene, and pore functionalized graphene were conducted throughout the use of the extended capabilities of COMSOL Multiphysics® modules, modeling and simulating the activation of functionalized building-blocks made of graphene and C- ... Per saperne di più
The Geoenvironmental Engineering Group of the University of Castilla-La Mancha is developing a computational tool, M4B, for describing the influence of environmental loads on the deformation behavior of soils and its interaction with building foundations. This tool comprises a set of ... Per saperne di più
A dual axis MEMS seismometer targeted for building monitoring system has been simulated for a full scale of ±5g acceleration. The design uses the capacitive effect for vibration sensing. This comb drive capacitive MEMS seismometer consists of 8 springs with two proof masses. The device ... Per saperne di più
The problem of storage, and release of thermal energy is an important challenge in various industrial fields. Several systems for thermal energy storage exist like phase change materials (PCM) and thermochemical storage [1]. The first system usually addresses short term storage (day ... Per saperne di più
Pioneering Computational Models for the Built Environment Energy performance is becoming more important in the build environment. With better insulated buildings, the possibility of moisture problems and thermal bridges increases. There for, it is not only important to determine the ... Per saperne di più
Electric vehicles (EVs) present a sustainable alternative to internal combustion engine vehicles. However, their widespread adoption remains hindered by limited driving range and insufficient charging infrastructure. Wireless power transfer (WPT) technologies, particularly those enabling ... Per saperne di più
Temperature measurements of the subsurface are available due to hydrocarbon exploration in the project area, where the average drilling depth is about 2-4 km and the deepest well reaches about 8.5 km. Since the data is heavily uneven distributed, standard interpolation techniques did not ... Per saperne di più