Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
确保电池模组的温度均匀性是电池热管理系统设计中的重要工作。本文设计了一种具有不同电池分布策略的锂离子圆柱电池模块，以提高其均匀性。建立了3维传热—1维电化学耦合有限元模型，对电池模块的布置进行了分析和优化。基于等差数列和等比数列来排列电池的间隔。发现在电池之间改变间隔的布置是改善电池模组内电芯均匀性的有效方式，尤其是等差数列布置。电池模块的最大温差随着初始间距的增加而减小。电池初始间距达到5.5mm时，电池模块的最大温差可降低13％，最大电压差可降至2.5 mV。具有等差数列布置的电池模块内部的温度和放电的均匀性优于等比数列布置 ... Per saperne di più
This paper presents a design of polymer based micro heater operating in the temperature range of 200- 250°C which could be operated at low voltage (battery operated). The micro heater has been designed and simulated using COMSOL 4.1, FEM simulation tool. Simulation was performed for ... Per saperne di più
Model calibration and validation were implemented using experimental data from literature. We utilized a microfluidic electrochemical cell that was configured with parallel, rectangular, and multi-layered channels, which is operating in a co-flow mode. CO2 gas stream enters the cathode ... Per saperne di più
Using COMSOL Multiphysics 3.5, a numerical model has been developed to determine the effect of the channel geometry and electrode configuration on cell performance based on polarization curves. The Butler-Volmer equation was implemented to determine the reaction rates at the electrodes. ... Per saperne di più
The US Advanced Battery Consortium (USABC) has established goals for long term commercialization of advanced batteries for electric vehicle applications. In this work, a dual lithium-ion insertion cell with silicon as the negative electrode and an intercalation material as the positive ... Per saperne di più
This poster outlines the results of finite element analyses to study the antenna radiation pattern of an implanted medical device. Also presented are simulation results used to design an electrically small antenna for a portable control unit that communicates with the implants over the ... Per saperne di più
LiveLink™ for MATLAB® is used to fit the surface temperature of a battery cell within a COMSOL Multiphysics® model to the temperature measured by a thermal imaging camera. The test bench was designed and built up of ourselves to allow nondestructive thermal diffusivity measurement of Li ... Per saperne di più
Enzymatic biofuel cells (EBFCs) are miniature implantable power sources, which use enzymes as catalysts to perform redox reaction with biological fuels such as glucose. In this study, we focused on a three dimensional EBFC chip with highly dense micro-electrode arrays, fabricated by ... Per saperne di più
There is great interest in developing all-solid-state lithium-ion batteries. They are ideal micro-power sources for many applications in portable electronic devices, electric vehicles and biomedical engineering. It is known that all-solid-state lithium-ion batteries are often fabricated ... Per saperne di più
Svante Littmarck is the CEO of the COMSOL group. He co-founded COMSOL in 1986. He holds a M.Sc. in Applied Mathematics from the Royal Institute of Technology in Stockholm. In 2004 he received an honorary doctoral degree from the Royal Institute of Technology. Per saperne di più