Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
We are developing a solid state gas sensor that combines a small form factor with the high sensitivity of optical gas detection. The gas sensor is based on an optical resonant microsystem that is penetrated by gas molecules. This microsystem consists of an array of vertical rods in air ... Per saperne di più
Two transmitting planar microcoils (TX1, TX2) and one receiving microcoil (RX) are employed as shown in Fig.1 formed in induction-balance configuration. RX-Coil is positioned in such a way to achieve primary field suppression in RX-Coil’s region. Meaning, a magnetic cavity is created in ... Per saperne di più
Conventional eddy current techniques have been used to a great extent for detection of surface breaking defects in conductive materials. However, detection of sub-surface defects is limited due to the single frequency and skin effect phenomena. Pulsed Eddy Current (PEC) techniques ... Per saperne di più
Silicon based MEMS have wide applications in under water sensors. This work aims one such applications, hydrophone. Hydrophone detects the pressure variations of acoustic signals and noise in the water and produces an output voltage proportional to the pressure. Here the attempt is made ... Per saperne di più
We demonstrate a broadband metamaterial (MM) absorber for THz frequencies. The MM was characterized in the spectral region of 0.3 - 3 THz with THz Time domain spectroscopy (TDS) using 1 mm ZnTe crystal for Electro-optic detection. A strong broadband resonance is observed, centered around ... Per saperne di più
Detecting light emitted by fluorescent molecules with resolution down to single photon is an important problem in various fields of sciences and applications, such as solid-state physics, quantum information processing and medicine. The detection probability can be improved via ... Per saperne di più
The Scanning Field Emission Microscopy (SFEM) is a novel technology similar to the better known Scanning Tunneling Microscopy (STM). In STM, electrons are exchanged between the outermost atom of a sharp tip and the outermost atom of a target over sub-nanometer distances by means of the ... Per saperne di più
Residual Gas Analyzers (RGA) are often used to measure background gases and contaminations in vacuum systems. An ionizer is used to ionize gas molecules and these ions are accelerated and focused by an electrical field from the ion source to form an ion beam. The ions can be ... Per saperne di più
Mathematical modeling and simulation of electrical fields through the human skin provide important insights into its electrophysiological state. As the human skin is a complex multi-layer entity of different compositions, we have chosen to select representative material properties to ... Per saperne di più
Gas sensor arrays based on metal oxides operating at high temperature are commonly used in many application fields. They can operate on different principles and each sensor may show very different responses to the individual gases in the environment. Data coming from the array can be ... Per saperne di più