Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Introduction Leaky Surface Acoustic Wave (LSAW) resonators in rotated Y-X cut Lithium Tantalate (LiTaO3) are widely used for resonator based ladder filters in telecommunication applications. These devices make use of quasi- shear waves confined to the surface of the piezoelectric layer ... Per saperne di più
Surface acoustic wave gas sensors use a chemically sensitive resistive layer to detect gas concentration. The resistivity of the sensing material, the sensing layer thickness, and the spacer layer thickness all affect the surface wave propagation velocity. Existing analytic theory ... Per saperne di più
In this paper we present a method to mitigate the effect of thermally-induced noise in Micro-Electro-Mechanical Systems (MEMS) through a force feedback circuit. Inherent noise-induced vibrations, which would be inconsiderable in macro scale, are considered as a limitation in micro- and ... Per saperne di più
This paper presents a methodology towards designing, analyzing and optimizing piezoelectric interdigitated microactuators using COMSOL Multiphysics. The models used in this study were based on a circularly interdigitated design that takes advantage of primarily the d{;sub}33 ... Per saperne di più
为实现超声导波对零部件的遍历检测，需研究超声导波相位模态控制与空间聚焦双相控技术。本文建立了超声导波阵列传播模型，推导得到二维阵列相位模态控制与空间聚焦双相控方法，在有限元软件COMSOL中运用固体力学物理场接口，建立铝板超声导波二维阵列聚焦传播模型，通过对各阵元添加不同的延时控制，实现激励模态控制与空间聚焦仿真，获得激励模态下铝板中超声导波传播的位移场分布，为超声导波阵列换能器的研制以及聚焦实验研究提供了有力依据。 Per saperne di più
COMSOL Multiphysics® simulation software is receiving a lot of attention in the loudspeaker industry thanks to the quality of the results it provides making it an essential tool to optimize geometries so that the best reproduction capabilities of the loudspeaker system are achieved. ... Per saperne di più
The purpose of this paper is to describe numerical electro-thermal simulations of the REMS wind sensor unit and the results obtained by using COMSOL Multiphysics. This device is a hot-film anemometer for 2D wind measurements, which does not have movable parts and is based on the air ... Per saperne di più
In this paper, we present study on the mass loading effect of the interdigital transducer (IDT) on surface acoustic wave (SAW) velocity in SAW devices, using COMSOL Multiphysics. We have simulated a one port SAW resonator made on YZ lithium niobate substrate and investigated the ... Per saperne di più
Usually fatigue-life tests of materials are long, time-consuming and expensive. With the development of high power piezoceramic actuators nowadays it is possible to provide at very high cycles 10e10 fatigue tests (VHCF) for reasonable times, at high frequency. The ultrasonic fatigue ... Per saperne di più
传统声表面波（SAW）滤波器技术存在Q值低（＜1000）和频率随工作温度漂移的特性，已经难以满足频段越来越拥挤的5G时代射频终端对滤波器的要求，因此，传统的SAW滤波器必须向具备高频率-温度稳定性的温度补偿型SAW（TC-SAW）滤波器发展。鉴于SiO2层与压电层具有相反温度弹性的特性，且该工艺比另一种键合温补方法简单、成本低，是目前国内外声表厂家广泛采用的一种温补方式。 对该种TC-SAW谐振器进行COMSOL建模仿真，研究SiO2层、指条层厚度对SAW波导的影响，以及材料参数和结构尺寸与SAW滤波器频率温度系数（TCF）及机电耦合系数之间的关系 ... Per saperne di più