Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
INTRODUCTION The purpose of this work is to verify the effect of Multigrid method on the CPU time for the resolution of the heat transfer model, based on the Finite Element Method (FEM), in order to simulate the laser surface remelting (LSR) of the Al–1.5 wt.% Fe alloy. To accelerate the ... Per saperne di più
A 3D thermo-mechanical simulation was developed using COMSOL Multiphysics software in order to predict distortion of a welded dissimilar titanium alloys structure. An angular distortion and a longitudinal shrinkage are predicted in agreement with those obtained experimentally. Per saperne di più
Arc welding is a widely used process in heavy industry for the assembly of metallic components. To ensure high-quality welds, it is essential to understand both the welding process and the complex interactions within the melt pool. Numerical simulation is employed as a predictive tool to ... Per saperne di più
The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam ... Per saperne di più
In all implantable medical devices, one main challenge is to assure no water penetrates in the electronic part of the system. To be able to transmit the electronic information from the inside of the device to the lead without any water infiltration, we used a complex part called feed ... Per saperne di più
Laser immunotherapy (LIT) was developed to treat late-stage, metastatic cancers through local laser irradiation and immunological stimulation. In ILIT, the photothermal effect induces immune responses by destroying and interrupting tumor cells through temperature elevation in target ... Per saperne di più
Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The combination of an AC electric field with a small temperature gradient leads to a strong electrothermal flow that can be used for multiple purposes. Combining simulations and ... Per saperne di più
This study presents a numerical investigation of optical butt-coupling between Vertical-Cavity Surface-Emitting Lasers (VCSELs) operating at 850 nm and Standard Single-Mode Fiber (SSMF), a widely adopted configuration in cost-effective, high-speed optical interconnects, especially in ... Per saperne di più
Abstract: Due to the restriction of the number of probes that a patient can tolerate, and the inaccurate information provided by the invasive temperature measurements, which provide information only at discrete points, a mathematical model simulation is more effective to help doctors in ... Per saperne di più
We present the design and performance simulations for a microwave cavity for use in novel compact cold atom atomic clocks. Design goals for such a microwave cavity are a resonance frequency at the Rubidium ground-state transition frequency of 6.835 GHz, combined with a moderate quality ... Per saperne di più