Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper e Appunti applicativi

Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.

Visualizza gli articoli presentati alla COMSOL Conference 2020

Search Term:

MEMS and Nanotechnology

Designing the Actuator for the Next-Generation Astronomical Deformable Mirrors: a Multidisciplinary and Multiphysics Approach

C. Del Vecchio[1], R. Biasi[2] , D. Gallieni[3], and A. Riccardi[1]

[1]INAF-OAA, Fierenze, Italy
[2]Microgate Srl, Bolzano, Italy
[3]ADS International Srl, Valmadrera, Italy

The actuation system of the deformable mirror is one of the crucial components of an Adaptive Optics unit. One possible implementation comprehends a linear force motor and a capacitive sensor providing the feedback measure signal. Choosing a magnetic circuit that makes optimum use of the ... Per saperne di più

Simulation of the Dynamic Behavior of a Droplet on a Structured Surface using the Non-conservative Level Set Method

N. Boufercha, J. Sägebarth, and H. Sandmaier
Universität Stuttgart / IFF-MST, Stuttgart, Germany

The ongoing trend towards miniaturization, higher integration as well as cost efficiency will make it necessary to investigate a new assembly method for micro components. In this paper, a novel method of fluidic-based micro assembly is presented. A self-assembly effect which is caused by ... Per saperne di più

FEM Correlation and Shock Analysis of a VNC MEMS Mirror Segment

E. Aguayo[1], R. Lyon[2], M. Helmbrecht[3], S. Khomusi[1]
[1]The Newton Corporation, Bowie, MD, USA
[2]NASA Goddard Space Flight Center, Greenbelt, MD, USA
[3]Iris AO, Inc., Berkeley, CA, USA

Microelectromechanical systems (MEMS) are becoming more prevalent in today’s space technologies. The Visible Nulling Coronagraph (VNC) instrument, being developed at the NASA Goddard Space Flight Center, uses a MEMS Mirror to correct wavefront errors. This MEMS, the Multiple Mirror ... Per saperne di più

Platform Isolation Using Out-of-Plane Complaint Mechanisms

A. Arevalo[1], E. Rawashdeh[1], I. G. Foulds[2]
[1]Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
[2]School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada

This paper reports the structural solid mechanic simulation of a MEMS out-of-plane platform that provides thermal and electrical isolation for a device built on it. When assemble, the platform lifted for approximately 400 μm above the substrate level. A mechanical stress analysis is then ... Per saperne di più

High Frequency Resonators Using Exotic Nanomaterials

B. Panchapakesan[1], M. Loeian[1]
[1]Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

Human made mechanical resonators have been around for a thousand years. Early applications included musical instruments and chronographs operating in millihertz to kilohertz frequencies while more recent interest has turned ultra-high frequency resonators and oscillators suitable for ... Per saperne di più

AC Electrothermal Characterization of Doped-Si Heated Microcantilevers Using Frequency-Domain Finite Element Analysis

K. Park[1], S. Hamian[1], A. M. Gauffreau[2], T. Walsh[2]
[1]Mechanical Engineering Department, University of Utah, Salt Lake City, UT, USA
[2]Department of Mechanical, Industrial & Systems Engineering, University of Rhode Island, Kingston, RI, USA

This work investigates the frequency-dependent electrothermal behaviors of freestanding doped-silicon heated microcantilever probes operating under the periodic (ac) Joule heating. The transient heat conduction equation for each component (i.e., the low-doped heater region, the high ... Per saperne di più

Fast Biofluid Transport of High Conductive Liquids Using AC Electrothermal Phenomenon, A Study on Substrate Characteristics

A. Salari[1], C. Dalton[1]
[1]University of Calgary, Calgary, AB, Canada

AC electrothermal (ACET) micropumps are based on the temperature gradient caused by Joule heating or an external heat source in the bulk of an electrolyte. In this paper, a 2D simulation was performed to study the effect of substrate thickness and material (glass and silicon) for an ACET ... Per saperne di più

Simulation of a Polyimide Based Micromirror

A. Arevalo[1], S. Ilyas[2], D. Conchouso[1], I. G. Foulds[1,3]
[1]Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
[2]Physical Sciences & Engineering (PSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
[3]School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada

The simulation of a micromirror using polyimide as the structural material is presented. The simulation was used to verify the initial design parameters and to explore the different characteristics of the electromechanical device. For simulation simplicity the electrodes are integrated ... Per saperne di più

Three-Dimensional Percolation Properties Simulation of a Marine Coating Based on Its Real Structure Obtained from Ptychographic X-Ray Tomography

B. Chen[1], M. Guizar-Sicairos[2], G. Xiong[1], L. Shemilt[1], A. Diaz[2], J. Nutter[1], N. Burdet[1], S. Huo[1], F. Vergeer[3], A. Burgess[4], I. Robinson[1]
[1]London Centre for Nanotechnology, University College London, London, UK
[2]Paul Scherrer Institute, Villigen, Switzerland
[3]AkzoNobel Co. Ltd., Sassenheim, Netherlands
[4]AkzoNobel (UK) Co. Ltd., Tyne and Wear, UK

We present quantitative nano-scale analysis of the 3D spatial structure of an anticorrosive aluminium epoxy barrier marine coating obtained by ptychographic X-ray computed tomography (PXCT) [1-3]. We then use COMSOL Multiphysics® software to perform simulations on the acquired real 3D ... Per saperne di più

Princípio Calorimétrico Aplicado a Medição de Vazão

T. Cavalcanti[1], A. Lima[1], J. Neto[1]
[1]Universidade Federal de Campina Grande, Campina Grande, PB, Brasil

Introdução: A medição adequada de vazão de fluidos é de grande importância nos processos industriais, pois tem implicações diretas na qualidade, produtividade, segurança e eficiência dos processos. Assim, torna-se necessário compreendermos como os fluidos se comportam para baixas ... Per saperne di più

Primo

481–490 of 531

Prossimo

Ultimo