Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam ... Per saperne di più
In all implantable medical devices, one main challenge is to assure no water penetrates in the electronic part of the system. To be able to transmit the electronic information from the inside of the device to the lead without any water infiltration, we used a complex part called feed ... Per saperne di più
Multiphysics optimization of thermal-fluid systems is an emerging area of interest with application to the development of high performance cooling technologies for electronic systems. This paper builds on previous work focused on the development of a computational platform for numerical ... Per saperne di più
The microwave heating and processing of heterogeneous material is usually simulated using a set of coupled PDE equations in an homogeneous medium. Nowadays it is possible to describe more accurately the process with a suitable description of the heterogeneities that is at the grain ... Per saperne di più
A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > ... Per saperne di più
In this paper, thermal properties of composites are investigated numerically and experimentally. In the numerical study, finite-elements method in COMSOL is used to modelize heat transfer and to calculate the Effective Thermal Conductivity (ETC) of the composite for three elementary ... Per saperne di più
The freezing curve of the food material was extracted from Differential Scanning Calorimetry experiments. A heat conductive model was generated in COMSOL, including the thermo-physical characteristics and the phase transition behavior. The resulting temperature-time evolutions at ... Per saperne di più
Finite element modeling of agricultural materials is very often used for describing physical processes. However, exact physical measurements are needed as input parameters for the models. Knowing the driving forces (potentials) during heat and mass transfers is necessary for an accurate ... Per saperne di più
Non aqueous metal fuel reprocessing involves electrochemical deposition of spent metallic fuel on the cathode of an electrolytic cell. Apart from metal fuel, the cathode deposit would also contain occluded molten salts and liquid cathode. Subsequent purification and consolidation of ... Per saperne di più
Pyrochemical process based on molten salt electrorefining is ideally suited for reprocessing spent metallic fuels from Fast Breeder Reactors. In this work, a heat transfer analysis of the Electrorefiner cell was conducted to develop a basic tool for designing of the engineering–scale ... Per saperne di più