Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Metal honeycombs are used as catalyst supports. They can be considered as complex fins for heat exchange. A simple heat transfer model was compared with 2D simulations using COMSOL Multiphysics. There was a good correlation when the fluid temperature was the same in all cells. However, ... Per saperne di più
Thermal conductivity of near surface soil layers is a key parameter for understanding the energy balance of planetary bodies. To measure this property, heated needle sensors are frequently used in field and laboratory applications. To adapt this type of sensors for application on space ... Per saperne di più
This paper includes the implementation and comparison of two types of moisture potentials for the combined transport: the natural logarithmic of the suction pressure (LPc) and the relative humidity (RH). The finite element method has been utilized to evaluate coupled 1D thermal and ... Per saperne di più
In this paper a two dimensional time dependent model is developed and assessed to describe the interrelated processes of conduction, convective heating and ablation of non pyrolytic ablative material. An aerothermochemical analysis for the process of non-pyrolitic composite material ... Per saperne di più
A multiphase porous media model involving heat and mass transfer within a potato chip was implemented in COMSOL 3.5a. The diffusive flux in oil and liquid water was modeled from capillary driven flow while the gas phase was modeled using binary diffusion. A non-equilibrium water ... Per saperne di più
Nanoparticles are being extensively researched as a noninvasive method for selectively targeting and killing cancer cells. In this study, we model the thermal activation of gold nanospheres and nanorods in a fluidic environment to determine the thermal response of the surrounding medium. Per saperne di più
A cornerstone of Chemical and Mechanical Engineering undergraduate programs the world over is the experimental and theoretical study of heat exchange. Graduating engineering students gain some appreciation in their lab course by comparing empirical correlations combined with the ... Per saperne di più
Natural convection has to be accounted and simulated for in order to properly describe the physics encounter in the phase change process. A simplified two-dimensional model was created in COMSOL 4.1. Natural convection was accounted for by adding a volume force and using the Boussinesq ... Per saperne di più
This paper investigates the evolution of a single bubble going through growth, pinch-off, and condensation while rising due to buoyancy forces in a sub-cooled liquid. Phase change is modeled on the evolving liquid-vapor interface by considering changes in enthalpy and heat fluxes at the ... Per saperne di più
The High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) is an 85 MW, light-water moderated, research reactor that operates at low temperature and high pressure. The HFIR is presently scheduled to convert from a high enriched uranium fuel (HEU) to a low enriched ... Per saperne di più