Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Cooling and Hardening during Injection Molding of Field Joint Coatings for Deep Sea Pipelines
A multilayer polymer coating is applied to carbon steel pipelines installed in the sea to protect against corrosion and to insulate to maintain the temperature. For field joint coatings, both thermosets (like polyurethane) and semi-crystalline thermoplastics (like polypropylene) are ... Per saperne di più
Modeling Transient Adsorption/Desorption Behavior in a Gas Phase Photocatalytic Fiber Reactor
Integration or retrofitting of photocatalytic air purifying units into HVAC (Heating, Ventilation and Air Conditioning) equipment is an interesting approach for abating indoor air pollution and removal of volatile organic compounds. An attractive possibility is the use of glass fiber ... Per saperne di più
Natural Convection around Horizontal Cylinders subjected to Non-uniform Heating
A two-dimensional steady model of the natural convection around a cylinder is solved numerically using COMSOL Multiphysics software. The cylinder receives non-uniform heat from a radiating panel, which is assumed to be sufficiently far away so that the flow around the panel does not ... Per saperne di più
The Virtual Aquarium: Simulations of Fish Swimming
Our goal is to reproduce the key features of carangiform swimming by running 2D simulations which fully exploit the Fluid-Structure Interaction interface of COMSOL Multiphysics software. Fish swimming is an important area of research, with relevant developments on biomechanics, robotics ... Per saperne di più
Modeling of Non-isothermal Reacting Flow in Fluidized Bed Reactors
We investigate a prototype concept of a back-up electricity device where we use liquid formic acid (FA) to produce a mixture of carbon dioxide (CO2) and hydrogen (H2) which is used in a PEM fuel cell, Fig. 1. In the fluidized bed reactor the liquid FA is decomposed to a gaseous mixture ... Per saperne di più
Virtual Functional Product Development of a µ-Methane Steam Reformer
A micro steam methane reformer is a complex product consisting of multiple units. For the virtual functional product development it is necessary to validate these sub models separately. Therefore a reactor was designed to analyse kinetics of chemical reactions. The reactor design is ... Per saperne di più
Benchmarking Tailored Formulations of Multiphase Flow in Porous Media
Nowadays, gas and nuclear waste storage, shale gas and EOR exploitation rise the need to understand and predict the fate of multiphase flows in the underground. Various formulations for multiphase flow arise from different linear combinations of governing equations and choice of ... Per saperne di più
Simulation of a Nozzle in a Borehole
In boreholes nozzles have to be found advantageous to increase the infiltration rate of water into the subsurface ground. Studies and practice in the field shows that the infiltration of water into permeable aquifers can be improved, if the flow in the borehole is modified. Due to the ... Per saperne di più
High-Resolution FSI Modeling of a High-Aspect Ratio Involute Flow Channel in the HFIR at ORNL
The high flow rate within the HFIR cooling water flow channel causes the fuel plates to deflect which in turn, changes the coolant flow characteristics. This nonlinear feedback loop between the coolant and the fuel plate is the focus of the present simulation of the fluid-solid ... Per saperne di più
Mechanistic Modeling of Non-Spherical Bacterial Attachment on Plant Surface Structures
The particle tracking model provided a deeper understanding to the experimental results. The model showed good agreement with experimental data for rotation, transport and attachment. In the attachment model, protrusions create low velocity, low shear regions increasing attachment ... Per saperne di più