Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.
Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.
Visualizza gli articoli presentati alla COMSOL Conference 2025
MEMS resonators have been recently adopted in a wide variety of timing, sensing, and actuation applications. The ability to control the dynamics of resonance, namely the resonance frequency and quality factor of these resonators is crucial in achieving high precision performance within ... Per saperne di più
Machines with rotating components are prone to vibrations because an imbalance of the rotor would always act as a harmonic excitation force to the machine. Thus oscillations close to the natural frequencies are tried to pass through fast in the run-up and cast-down or even completely ... Per saperne di più
COMSOL Multiphysics® was used to evaluate the performance of a woofer coupled to an automotive door. Two uses cases were considered: rigid and non-rigid door structures. Using the Structural Mechanics Module, the speaker membrane displacement was computed for both cases from 20Hz to 500 ... Per saperne di più
Micro-machined ultrasound transducers have a wide range of applications. As a sensor or actuator they can be used for measuring fluid speed and direction, to mix and excite particles (sonication), for taking images (ultrasonography), for non-destructive testing and many other purposes in ... Per saperne di più
Today’s driver hardware for High-intensity discharge (HID) lamps is bulky, expensive and not particularly energy-efficient. A downscaling of the devices seems possible by increasing the operation frequency from typically 400 Hz to some hundred kilohertz. However, efforts to design high ... Per saperne di più
Amplitude of acoustic waves can be magnified by conical or concave waveguides, like in ear trumpets or fjords (surface waves). The simplest way realizing a capable device is a conical waveguide with a target to be treated in the top of the cone, and a spherical actor or acoustic exciter ... Per saperne di più
It is known that photoacoustic spectroscopy shows the highest signal-to-noise ratio compared to other spectroscopy techniques. This is due to an orthogonal detection scheme: while exciting with light we monitor soundwaves. In gaseous phase, the use of an acoustic chamber called cell ... Per saperne di più
There are several industrial applications, like food dehydration, atomization and textile washing among others, that are enhanced by the use of power ultrasonic transducers with flat rectangular plate radiator. These transducers are composed by three main parts, the piezoelectric ... Per saperne di più
Flexible and semi-rigid polyurethane foams are widely used as noise and vibration damping materials. Their porous random microstructure is composed of a visco-elastic frame structure with an interstitial fluid, normally air, filling the voids. The viscoelasticity of the foams is due to ... Per saperne di più
For non-imaging wearable ultrasound applications Novioscan is developing piezoelectric MEMS transducers. These transducers consist of a large array of micromechanical silicon membranes with piezoelectrically actuated regions to generate an out-of-plane displacement causing a pressure ... Per saperne di più
