Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper e Appunti applicativi

Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.

Visualizza gli articoli presentati alla COMSOL Conference 2020

All

Bengaluru 2023

Munich 2023

AC/DC Electromagneticsx

CMOS Based Atom Chips for Sensor Applications

Ph. Neuman [1], A. Nemecek [1], C. Koller [2]
[1] Department for Micro-and Nanosystems, University of Applied Sciences Wiener Neustadt, Austria
[2] Department for Micro-and Nanosystems, University of Applied Sciences Wiener Neustadt, Austria, and School of Physics and Astronomy, University of Nottingham, Nottingham, UK

Ultra-cold atomic systems have proven over the last decade to be a excellent platform for the realization of quantum sensors, quantum computation or quantum simulation applications. A special implementation of this technology is the so called atom chip, where the magnetic fields ... Per saperne di più

Multiphysical Simulation of Moved Data Cable

M. Raum [1]
[1] Friedrich-Alexander Universität, Erlangen, BY, Germany

In general this thesis is about the effects of mechanical stress on data cables in moved applications. If a data cable is loaded with different kind of forces and used within high frequency applications it is possible, that the geometrical changes may have an impact on the electrical ... Per saperne di più

3D-model of an AC/DC Hybrid EHV Transmission Line to Analyze the Electrical Field along Insulators

D. Potkrajac [1], S. Papenheim [1], M. Kizilcay [1]
[1] University of Siegen, Siegen, Germany

To increase the power transfer capacity of existing lines, a transmission system operator in Germany plans to replace an existing 380-kV three-phase AC system into a bipolar HVDC system on the same tower that is called a 'hybrid line'. Due to the proximity of AC transmission systems and ... Per saperne di più

Design and Optimization of Power Cable Accessories Using COMSOL Multiphysics®

A. Lewarkar [1], D. Bergsma [1], S. Madhar [2],
[1] E&D Department, Lovink Enertech B.V., Terborg, Netherlands
[2] Electrical Engineering Department, Delft University of Technology, Delft, Netherlands

Power cable manufacturing is limited by the maximum length of cable that can be produced and stored on cable drums. This creates a need or rather an opportunity for a cable accessory, namely 'Cable Joints'. Joints are an impeccable component in the power cable network that necessitate ... Per saperne di più

Impact of the Forces due to CLIQ Discharges on the New HL-LHC Beam Screen

M. Morrone [1], C. Garion [1],
[1] CERN, Geneva, Switzerland

In the framework of the high luminosity large hadron collider (HL-LHC) project, important upgrades will take place by 2024 including the installation of new superconducting magnets in which new beam screens will be placed. The beam screen is an octagonally shaped pipe inserted into the ... Per saperne di più

Green's Function Approach to Efficient 3D Electrostatics of Multi-Scale Problems

C. Roman [1], L. Schmid [1], L. Stolpmann [1], C. Hierold [1],
[1] ETH, Zurich, Switzerland

We present an efficient method to compute efficiently the general solution (Green's Function) of the Poisson Equation in 3D. The method proves its effectiveness when dealing with multi-scale problems in which lower dimensional objects, such as nanotubes or nanowires (1D), are embedded in ... Per saperne di più

Electron Trajectories in Scanning Field-Emission Microscopy

H. Cabrera [1],
[1] Swiss Federal Institute of Technology, Zurich, Switzerland

The Scanning Field Emission Microscopy (SFEM) is a novel technology similar to the better known Scanning Tunneling Microscopy (STM). In STM, electrons are exchanged between the outermost atom of a sharp tip and the outermost atom of a target over sub-nanometer distances by means of the ... Per saperne di più

Dynamic Simulation of a Coaxial Magnetic Gear Using Global ODE's and the Rotating Machinery, Magnetic Interface

M. Ostroushko [1], W. Zhang [1], W. M. Rucker [1],
[1] Institute of Theory of Electrical Engineering, University of Stuttgart, Stuttgart, Germany

The coaxial magnetic gear is a good alternative to classic mechanical gears. The magnetic gear has high mechanical durability, overload protection and lower noise, than a mechanical gear [1,2]. A static model of a magnetic gear [3,4] is used for simulation of the magnetic fields and ... Per saperne di più

EMC Simulation Using Source Reconstruction

A. Bergqvist [1], P. Jacobsson [1],
[1] Volvo Cars, Gothenburg, Sweden

Electromagnetic compatibility (EMC) is a growing issue in cars due to the increase in electrification of vehicles. Simulations can be useful for predicting issues at an early stage in the development cycle. This includes investigating EM stray fields that various components generate and ... Per saperne di più

A Standalone Interface for Web-Based Virtual Reality of Calculated Fields

M. Jüttner [1], N. Zhao [1], S. Grabmaier [1],
[1] University of Stuttgart, Institute for Theory of Electrical Engineering, Stuttgart, Germany

A standalone interface for web-based virtual reality and the underlying visualization system are presented. The developed user-friendly web application is implemented based on nowadays web techniques. Details for data handling and rendering are given to visualize COMSOL Multiphysics® ... Per saperne di più

Primo

291–300 of 875

Prossimo

Ultimo