Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

contact modeling problem

Posted 25 ago 2009, 22:50 GMT-4 5 Replies

Manohara Mariyappa
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone

I ve been working on a contact problem in which there are 2 concentric cylinders . the cylinders are not in contact initially but the inner cylinder expands and comes in contact with the outer cylinder. comsol solves the problem but there is penetration. I dont know whats wrong . I would really appreciate any comments.
Thank you,
Manohar
5 Replies Last Post 3 gen 2014, 09:59 GMT-5
Geoff Young
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 1 set 2009, 12:01 GMT-4
Did you set your contact pairs?
Did you set your contact pairs?
John Tam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 1 set 2009, 12:18 GMT-4
Hi Manohar,

I have been working on a similar problem like yours, which I have 2 objects that will expand due to temperature changes. previously someone has provided me with the following link of an example in contact problems, you may start with this one to gain more understanding.

www.comsol.com/showroom/gallery/1431/

Frankly, I still have errors in my problem and keep on trying; so maybe we can keep each other posted if any of us makes some discoveries.

John Tam
Hi Manohar, I have been working on a similar problem like yours, which I have 2 objects that will expand due to temperature changes. previously someone has provided me with the following link of an example in contact problems, you may start with this one to gain more understanding. http://www.comsol.com/showroom/gallery/1431/ Frankly, I still have errors in my problem and keep on trying; so maybe we can keep each other posted if any of us makes some discoveries. John Tam
Manohara Mariyappa
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 28 ott 2009, 22:28 GMT-4
Yeah I am quite sure my contact definition is set right . I still don't know whats wrong.
Yeah I am quite sure my contact definition is set right . I still don't know whats wrong.
Saurabh Mittal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 dic 2013, 03:41 GMT-5
Although Comsol is a fantastic software for multiphysics, it does not handle contact problems properly, and I moved over to Abaqus for contact problems.
Although Comsol is a fantastic software for multiphysics, it does not handle contact problems properly, and I moved over to Abaqus for contact problems.
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 gen 2014, 09:59 GMT-5
Hi,

COMSOL is continuously improving its contact algorithms and they have gone through many revisions since these original postings in 2009. The latest version, 4.4, has additional contact methods. See www.comsol.com/release/4.4#structural for more information. We have no reports of problems with uncontrolled penetration with mechanical contact. Contact simulations can sometimes be challenging and we recommend that you contact technical support for help with specific models.

See also the Knowledgebase articles www.comsol.com/support/knowledgebase/1102/ and www.comsol.com/support/knowledgebase/1171/ .

Some models showing how to perform contact analysis:

www.comsol.com/model/cylinder-roller-in-contact-a-benchmark-study-1431
www.comsol.com/model/contact-analysis-of-a-snap-hook-using-a-penalty-formulation-12577
www.comsol.com/model/prestressed-bolts-in-a-tube-connection-185
www.comsol.com/model/sliding-wedge-364

You can also analyze true multihysics contact problems as described in the section 'Thermal Contact Resistance' in www.comsol.com/heat-transfer-module, or in the model www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119

Regards,
Henrik

Hi, COMSOL is continuously improving its contact algorithms and they have gone through many revisions since these original postings in 2009. The latest version, 4.4, has additional contact methods. See http://www.comsol.com/release/4.4#structural for more information. We have no reports of problems with uncontrolled penetration with mechanical contact. Contact simulations can sometimes be challenging and we recommend that you contact technical support for help with specific models. See also the Knowledgebase articles http://www.comsol.com/support/knowledgebase/1102/ and http://www.comsol.com/support/knowledgebase/1171/ . Some models showing how to perform contact analysis: http://www.comsol.com/model/cylinder-roller-in-contact-a-benchmark-study-1431 http://www.comsol.com/model/contact-analysis-of-a-snap-hook-using-a-penalty-formulation-12577 http://www.comsol.com/model/prestressed-bolts-in-a-tube-connection-185 http://www.comsol.com/model/sliding-wedge-364 You can also analyze true multihysics contact problems as described in the section 'Thermal Contact Resistance' in http://www.comsol.com/heat-transfer-module, or in the model http://www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119 Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content