Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to scale model?

Posted 31 mar 2010, 19:47 CEST 1 Reply

Xiang Qiu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am building a heat transfer model for an array of elements. When i create a new element in the array. I need to reassign the boundary and subdomain conditions for it. It is really time consuming. Can I copy an element with its physical settings unchanged?
1 Reply Last Post 31 mar 2010, 21:05 CEST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 31 mar 2010, 21:05 CEST
Hi

There are some cut & paste functionalities, even advanced ones in COMSOL (select items in the model tree), but one thing that is not obvious, if you are changing your geometry, you might change the topology and the numbering/ordering of nodes, and boundaries, and then COMSOL cannot always manage to follow your whishes

Good luck
Ivar
Hi There are some cut & paste functionalities, even advanced ones in COMSOL (select items in the model tree), but one thing that is not obvious, if you are changing your geometry, you might change the topology and the numbering/ordering of nodes, and boundaries, and then COMSOL cannot always manage to follow your whishes Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content