Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to turn on display of domain/boundary/point numbers (in Model Builder~Graphics Window)
Posted 19 feb 2013, 07:40 GMT-5 Geometry, Mesh, Results & Visualization 1 Reply
Please login with a confirmed email address before reporting spam
A very simple question for which I cannot seem to find an answer! ..... nor successfully managed to locate it within documentation.
In the Graphics Window within Model Builder, it is often desirable to turn on/off the display of domain, boundary and/or point numbers. This can apply most commonly to meshes, but is also useful in results display/visualisation at times (e.g. when looking at contour plot on 2d surfaces).
Whilst there is access to varying degrees of Graphics Windows functionality/manipulation, via icons which appear above the window (...the number and extent of which are contextual), there is no obvious access to a whole host of possible annotations, even if that as a minimum simply comprises turning on/off all of the domain, boundary and/or point numbers...
In the Graphics Window within Model Builder, it is often desirable to turn on/off the display of domain, boundary and/or point numbers. This can apply most commonly to meshes, but is also useful in results display/visualisation at times (e.g. when looking at contour plot on 2d surfaces).
Whilst there is access to varying degrees of Graphics Windows functionality/manipulation, via icons which appear above the window (...the number and extent of which are contextual), there is no obvious access to a whole host of possible annotations, even if that as a minimum simply comprises turning on/off all of the domain, boundary and/or point numbers...
1 Reply Last Post 19 feb 2013, 09:11 GMT-5