Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

FEM results

Please login with a confirmed email address before reporting spam

Good eveving to all
In my work i design CMUT cell,for model how to get FEM results after meshing the structure.any information about this pls reply.

1 Reply Last Post 2 gen 2012, 04:12 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 gen 2012, 04:12 GMT-5
Hi

you get your results via the plots you define and via the tables you populate via the Results Derived Variables (use a CNTRL Enter to see the list of the available variables (there are many ;). Or you define your own specific variables in a define variable node, but then you must rerun your solver, or at least perform an "update solution" (all govern by the right click, take care train your fingers, the "tennis elbow" syndrome might appear ;;)

--
Good luck
Ivar
Hi you get your results via the plots you define and via the tables you populate via the Results Derived Variables (use a CNTRL Enter to see the list of the available variables (there are many ;). Or you define your own specific variables in a define variable node, but then you must rerun your solver, or at least perform an "update solution" (all govern by the right click, take care train your fingers, the "tennis elbow" syndrome might appear ;;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.