Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to plot the partial derivative of Magnetic flux
Posted 20 dic 2011, 16:25 GMT-5 Low-Frequency Electromagnetics Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
From the Magnetic field simulation result, I want to calculate the partial derivative of magnetic flux density.
Though, magnetic flux density shows fairly good result, the derivative of magnetic flux density is trivial.
That is, I want to calculate pd(mef.Bx,x) from mef.Bx, mef.Bx is 0.
Based on the exising technical forum, I chaned the discretization option, there was no difference.
Could you let me know how to sovle the partial derivative of magnetic flux density, pd(mef.Bx,x), by change any option in the model?
Thanks,
2 Replies Last Post 22 dic 2011, 20:10 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I think you should be using the d(...) operator to get what you want, not pd(...).
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank you for your reply.
However, it doesn't work to apply d(...) instead of pd(...).
However, it doesn't work to apply d(...) instead of pd(...).