Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL 4.1 time scaling coefficient

Posted 1 apr 2011, 15:18 GMT-4 Version 4.1 3 Replies

Cindy Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Anyone know where I can find the time-scaling coefficient in COMSOL 4.1? In comsol 3.5 the time-scaling coefficient can be inputted in the subdomain window for convection and diffusion problems. I can't seem to find it for COMSOL 4.1.

Thanks for the help!
3 Replies Last Post 4 apr 2011, 01:07 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 apr 2011, 10:53 GMT-4
Hi

I'm not sure its implemented, but you can always use a 30[hour] or 30[min] or even 30[day] and 3[year] as unit to get COMSOL (not sure if a "standard month" exist) to look after how many seconds that is, and for the plots you rescale the same way

--
Good luck
Ivar
Hi I'm not sure its implemented, but you can always use a 30[hour] or 30[min] or even 30[day] and 3[year] as unit to get COMSOL (not sure if a "standard month" exist) to look after how many seconds that is, and for the plots you rescale the same way -- Good luck Ivar
Cindy Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 apr 2011, 23:30 GMT-4
Thanks for the response. Do you also know how to implement a 1D problem in COMSOL 4.1 using spherical coordinates? In COMSOL 3.5 I was able to do this by setting the time scaling coefficient to r*r, but since now this can't be done in COMSOL 4.1.
Thanks for the response. Do you also know how to implement a 1D problem in COMSOL 4.1 using spherical coordinates? In COMSOL 3.5 I was able to do this by setting the time scaling coefficient to r*r, but since now this can't be done in COMSOL 4.1.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 apr 2011, 01:07 GMT-4
Hi

interesting way of using the time constant ;)

but don't you also need to correct the spatial dimension ?

I believe you should send this question to support, as it might give them ideas of alternate use of features in the programme

--
Good luck
Ivar
Hi interesting way of using the time constant ;) but don't you also need to correct the spatial dimension ? I believe you should send this question to support, as it might give them ideas of alternate use of features in the programme -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content