Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fuel cells stack simulation-Solver

Posted 15 mar 2011, 11:34 GMT-4 Low-Frequency Electromagnetics, Battery Design Version 3.5a 0 Replies

Margarita Arcila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am modeling a monopolar strip 3 fuel cells stack. It has the same membrane for all cells and the equations used in the simulation are as follows:

Convection and Diffusion (Oxygen_Cathode)
Convection and Diffusion (Ethanol_Anode)
Conductive Media DC (Anode)
Conductive Media DC (Cathode)
Conductive Media DC (Membrane)
Darcy's Law (DarcyLiquid)
Darcy's Law (DarcyGas)

I have tried to solve the problem by using any solver possible, I guess, I haven't set up the right conditions or parameters for the solver and I really don't know which of them would be the right one.

I have already read through the tutorial and it really didn't help to solve my situation.

The message I got (red letters) is:

Error:
Failed to find a solution:
Divergence of the linear iterations.
Returned solution has not converged.

I would really appreciate any advice!! Thanks!!
0 Replies Last Post 15 mar 2011, 11:34 GMT-4
COMSOL Moderator

Hello Margarita Arcila

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content