Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper

Scopri come la simulazione multifisica viene utilizzata in tutto il mondo per ricerca e sviluppo

La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.

Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.

Visualizza gli articoli presentati alla COMSOL Conference 2026

Exergy Analysis of Polymer Flooding in Clastic Reservoirs

A. Hassan [1], H. Bruining [2], T. Musa [3], R. Farajzadeh [2],
[1] Delft University of Technology, Delft, The Netherlands, and Sudan University of Science and Technology, Khartoum, Sudan
[2] Delft University of Technology, Delft, The Netherlands
[3] Sudan University of Science and Technology, Khartoum, Sudan

Using a 1-D model of polymer displacement, we analyze the exergy (maximum attainable work) balance of viscosified water, e.g. with Arabic gum. The 1-D model shows the principle how such an analysis can be done. A comparison as to the displacement efficiency is made between three ... Per saperne di più

Simulation of Dynamic Thermal Fields Assisting DMLS Additive Manufacturing of Biocompatible Ti-Alloy

E. Lacatus [1], G. C. Alecu [2], M. Sopronyi [3],
[1] Polytechnic University of Bucharest, Bucharest, Romania
[2] Groupe Renault, Bucharest, Romania
[3] National Institute for Laser, Plasma and Radiation Physics (INFLPR), Magurele, Romania

For the complex 3D biocompatible metallic parts, with high level of customization, used in medical prosthesis and implants Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are the most common Additive Manufacturing technologies used nowadays. However, both ... Per saperne di più

Simulation of an Impulse Arc Discharge in Line Lightning Protection Devices

A. Chusov [1], E. Rodikova [2], D. Belko [1],
[1] Streamer Electric Inc., Saint Petersburg, Russia
[2] Streamer Electric Inc. and Saint Petersburg State University, St. Petersburg, Russia

Line lightning protection devices (LLPD) nowadays are widely used for lightning protection of overhead power lines. LLPD is composed of electrodes in series embedded in silicone rubber which all together forms sequence of spark gaps. When lightning overvoltage is applied it causes ... Per saperne di più

Analysis of Electromagnetic Behavior of Permanent Magnetized Electrical Machines in Fault Modes

M. U. Hassan [1], R. Nilssen [1], A. Røkke [2],
[1] Department of Electrical Power Engineering, NTNU, Trondheim, Norway
[2] Rolls Royce Marine AS, Trondheim, Norway

The use of Permanent Magnet Synchronous Machines (PMSM) as shaft generators is not new in marine vessels propulsion drive trains. Due to risk of fires in stator windings by internal faults, DNV GL requires the shaft generator to be electrically dead without losing propulsion. This ... Per saperne di più

Modeling and Analysis of Aberrations in Electron Beam Melting (EBM) Systems

D. Svensson [1], A. Azhirnian [2],
[1] Arcam AB, Mölndal, Sweden
[2] Chalmers University of Technology, Gothenburg, Sweden

Arcam AB has pioneered additive manufacturing using the electron beam melting (EBM) technology which provides a cost efficient and novel way of producing titanium components for the orthopedic and aerospace industries. In the heart of the EBM technology is the electron beam – whose ... Per saperne di più

Evaluating Nanogaps in Ag and Au Nanoparticle Clusters for SERS Applications Using COMSOL Multiphysics®

R. Asapu [1], R. Ciocarlan [2], N. Claes [3], N. Blommaerts [1], S. Bals [3], P. Cool [2], S. Denys [1], S. Lenaerts [1], S. W. Verbruggen [1]
[1] Department of Bioscience Engineering, DuEL Research Group, University of Antwerp, Belgium
[2] Department of Chemistry, PLASMANT Research Group, University of Antwerp, Belgium
[3] Department of Physics, EMAT Research Group, University of Antwerp, Belgium

Silver and gold nanoparticles are widely used in the field of surface enhanced raman spectroscopy (SERS) because of the unique plasmonic properties. Plasmons or surface plasmon resonance result from the wavelength dependent dielectric properties of noble metals like Ag, Au, Pt etc., ... Per saperne di più

Sensitivity Analysis of CPP’s for Solvent Removal Process of a API-Protein Bonded Nano-Suspension

C. C. Huang [1], T. Liu [1], F. Faassen [1],
[1] Teva Pharmachemie B.V., Haarlem, The Netherlands

Solvent extraction and evaporation is a widely used unit operation in the manufacturing of micro and nano-particles. Due to the weak bond of the API to the protein, the product is highly sensitive to temperature, mechanical mixing and extraction/evaporation rate. A slow extraction ... Per saperne di più

A Multiphysics Model to Ensure Power Cables are Restrained Safely During Short Circuit Fault

M. S. Yeoman [1], R. J. Varley [1], R. Damodharan [1], L. Frizzell [2],
[1] Continuum Blue Ltd., Cardiff, United Kingdom
[2] CMP Products Ltd., Cramlington, United Kingdom

Trefoil cable formation is used where three phases are carried by three single core power cables, rather than a single three phase multicore cable. The advantage of installing three single cores in such a configuration is that it minimises the induction of eddy currents, therefore ... Per saperne di più

Primo

2711–2718 of 6555

Prossimo

Ultimo