SIMULATION SUCCESS STORIES

ABB Alamo Simulates Smart Grid-Ready Tap Changers

Energy Electronics

Tommi Paananen, David Geibel, Bill Teising, Mårten Almkvist, Jon Brasher, Josh Elder, Bob Elick and Chris Whitten
ABB Alamo
Tennessee

Consumers of power rely on fairly stable voltages. Transformers contain tap changers which vary the ratio of secondary to primary turns by switching the point at which either the input or output circuits are connected. Changing this ratio enables stepped voltage regulation of the output. As the world moves toward the modernized smart grid, the tap changer’s design must be altered to make it smart grid-ready.

ABB Alamo in Tennessee, a transformer components expert, took on this challenge. The biggest problem they faced was creating a design of the insulation for the tap changer which would have to withstand the stress of thousands of volts. The dielectric materials can fail in two ways: breakdown through the material and breakdown across the surface.

To address this dielectric stress problem, ABB built a model of the geometry and imported it into COMSOL Multiphysics using LiveLink™ for Creo™ Parametric. They were then able to adjust the geometry of the large CAD assemblies and synchronize the corresponding geometry in COMSOL to generate a high-quality mesh for large-scale batch simulation. Using COMSOL, ABB was able to develop tap changers based on actual field conditions.

  •  /
1
Loading PDF...

Suggested Stories

Optimizing Fluid Sensors for Industrial Process Measurement

Optimizing Fluid Sensors for Industrial Process Measurement

Endress+Hauser, a global leader in measurement instrumentation for industrial process engineering, is using ...

Pumping and Injecting from a Single Borehole

Pumping and Injecting from a Single Borehole

Professor Dr. Martin Sauter leads a group at the University of Göttingen in research on hydrogeology. Cooperating with ...

Optimization Slashes Energy Consumption in Silicon-Based MEMS CO2 Detectors

Optimization Slashes Energy Consumption in Silicon-Based MEMS CO2 Detectors

CEA-MINATEC is an international center for micro and nano-technologies which is funded by CEA, a French government ...

Nanoresonators Get New Tools for Their Characterization

Nanoresonators Get New Tools for Their Characterization

Nanoresonators, or optical nanoantennas, manage the concentration, radiation, and absorption of light at the nanometer ...