SIMULATION SUCCESS STORIES

ABB Alamo Simulates Smart Grid-Ready Tap Changers

Energy Electronics

Tommi Paananen, David Geibel, Bill Teising, Mårten Almkvist, Jon Brasher, Josh Elder, Bob Elick and Chris Whitten
ABB Alamo
Tennessee

Consumers of power rely on fairly stable voltages. Transformers contain tap changers which vary the ratio of secondary to primary turns by switching the point at which either the input or output circuits are connected. Changing this ratio enables stepped voltage regulation of the output. As the world moves toward the modernized smart grid, the tap changer’s design must be altered to make it smart grid-ready.

ABB Alamo in Tennessee, a transformer components expert, took on this challenge. The biggest problem they faced was creating a design of the insulation for the tap changer which would have to withstand the stress of thousands of volts. The dielectric materials can fail in two ways: breakdown through the material and breakdown across the surface.

To address this dielectric stress problem, ABB built a model of the geometry and imported it into COMSOL Multiphysics using LiveLink™ for Creo™ Parametric. They were then able to adjust the geometry of the large CAD assemblies and synchronize the corresponding geometry in COMSOL to generate a high-quality mesh for large-scale batch simulation. Using COMSOL, ABB was able to develop tap changers based on actual field conditions.

  •  /
1
Loading PDF...

Suggested Stories

Simulating Printhead Unimorph Actuators at FUJIFILM Dimatix

Simulating Printhead Unimorph Actuators at FUJIFILM Dimatix

FUJIFILM Dimatix, a top producer of commercial inkjet printheads, uses multiphysics simulation to develop MEMS ...

Reduced-Weight Reaction Sphere Makes Way for Extra Satellite Payload

Reduced-Weight Reaction Sphere Makes Way for Extra Satellite Payload

CSEM is a private applied research and development center specializing in micro-technology, system engineering, micro ...

Lighting the Way for Improved Synchrotron Vacuum Chambers at RadiaSoft

Lighting the Way for Improved Synchrotron Vacuum Chambers at RadiaSoft

One of the goals of the Argonne National Laboratory (ANL) is to increase the brightness of synchrotron beams for the ...

Wind Turbine Noise Reduction

Wind Turbine Noise Reduction

Xi Engineering Consultants Ltd specializes in complex vibration issues, like those caused by wind turbines. The ...