Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
An extension of the Solid Mechanics interface in COMSOL Multiphysics® is presented to analyze localized deformations of quasi-brittle materials, for example cracking in concrete. This is achieved by implementing an isotropic damage mechanics constitutive law, which is combined with both ... Per saperne di più
Using the Solid Mechanics interface, a model is set up to investigate the impact of static stress on a bicycle chain for different geometries related to three chain generations. A contact model is used to induce the stress. Plastic deformation is taken into account. Based on the ... Per saperne di più
The primary enclosure of an injected formulation is almost exclusively comprised of a glass container (syringe) and an elastomer closure (i.e. plunger). A failed injection is anything that prevents the full dosage of the drug to be administered, whether that is a glass breakage or ... Per saperne di più
Surface Acoustic Wave devices are classic examples of Micro Electro Mechanical Systems (MEMS). These devices basically utilize inter-digitated electrodes (IDE) and a piezoelectric layer deposited over a substrate. The input IDT is supplied with alternating voltage and because of this, ... Per saperne di più
Within the ENHANCE European project, hybrid energy harvesters have to be designed and developed to supply small and autonomous sensors in automobiles. The focus of this work is particularly related to the harvesting of energy from the vibration of the vehicle and from the high ... Per saperne di più
In this work the effective elastic properties of a SU8 photoresist matrix reinforced with ZnO nanomaterial (in the form of cylindrical nanowires, spherical and ellipsoidal particles) have been evaluated employing COMSOL Multiphysics® software. The Solid Mechanics physics interface of ... Per saperne di più
Introduction With the vast development in the aerospace industry it is inevitable that currently used materials such as Nickel based super alloys will soon reach its peak performance. Hence developing alternative materials with similar properties that could be enhanced further is ... Per saperne di più
Structural Health Monitoring Systems are being highly investigated to evaluate the health of a structure and detect any damages occurring in real time. Such systems require intensive data analysis which gets even more intricate when working with complex structures due to undesirable ... Per saperne di più
High frequency ultrasound (100-1000 MHz) has been used in microscopy since the 1970s. The main imaging component, the acoustic lens, is commercially available. The resolution, working distance, and focal length depend on the structure of a lens, which is unique for each produced lens. ... Per saperne di più
High intraocular pressure (IOP) is a risk factor for glaucoma, a condition that can cause blindness. Conventional ways of measuring IOP either require contact or can be uncomfortable for the patient. We have developed a method to measure IOP from the propagation time of a wave on the ... Per saperne di più