Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Transmission-line transducers are used for the measurement of absorption and reflection of different materials, such as: liquids, granular medium, and ground. A simplified methodology for calculation of scattering parameters of such transducers is presented. The transducer cell is ... Per saperne di più
Phononic crystals are a class of materials that exhibit periodic variations in their density and elastic properties. Such crystals modify the propagation of acoustic waves and prohibit the propagation of sound for frequencies within the band gap. We discuss the simultaneous existence of ... Per saperne di più
Optical cavities play a major role in any spectroscopic setup. THz being invisible to normal human eye, designing a proper cavity for TDS setup becomes essential. Unlike the standard TDS setups for transmission geometry, the setups for reflection geometry is tricky in terms of alignment. ... Per saperne di più
Nano-structures consisting of layered metal-dielectric stacks (MDSs) can be designed to have evanescent transmission and reflection coefficients that oscillate as a function of transverse wavevector and frequency. However, these structures always suffer from the material losses and ... Per saperne di più
Two different Finite Element Method (FEM) models of the CANDU® nuclear fuel channels were compared against experimental data to determine if the curvature of the fuel channels is necessary to consider for measurements of the pressure tube to calandria tube gap. The different models were ... Per saperne di più
The paper presents the three dimensional (3D) Finite Element Method (FEM) COMSOL Multiphysics® model of a Three Phase Permanent Magnetic Excited Transverse Flux Machine (TFM). The model is fully parameterized and able to sweep over all parameters during design optimization process. The ... Per saperne di più
Acceleration is an important quantity to be measured in high-speed dynamics. A new piezoresistive sensor for the measurement of high-amplitude, short-duration transient accelerations of up to 100,000 g has been developed at the Fraunhofer EMI. Its figure of merit (sensitivity x resonance ... Per saperne di più
The aim of the proposed device is to overcome the typical drawbacks of MHD generators, such as the needed of a very high external magnetic field, the strong dependency of the efficiency by the temperature of the fluid, and the deterioration of the electrodes that are in contact with the ... Per saperne di più
In this paper an EMVD (Electro-Mechanical Valve Drive) for combustion engines is redesigned to achieve a fail-safe behavior when power loss occurs. The AC/DC Module and the Moving Mesh interface of COMSOL Multiphysics 4.2 are used to build up a transient model. This model also includes ... Per saperne di più
The optimal design of the grating coupler for surface plasmon generation is revisited for its interdisciplinary importance in the efficient use of energy, and the strong dependence of the energy convergence rate of the system on the design. This work contributes a comprehensive gradient ... Per saperne di più