Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
为满足电动汽车对长续航和快充电的需求，提升锂离子电池的能量密度和快充性能至关重要。锂离子电池在快速充放电过程中的电极结构退化问题已成为制约其性能提升的关键瓶颈。尤其在高倍率循环条件下，电极活性颗粒内部会因锂离子浓度梯度和相变引发的非均匀体积膨胀而产生显著的机械应力，进而导致微裂纹的萌生与扩展。本研究建立了耦合锂离子扩散、相变、应力演化及断裂过程的COMSOL模型，系统研究了单晶电极颗粒、二级电极颗粒和厚电极的断裂行为。在单晶颗粒尺度，建立了耦合锂扩散、相变、应力与断裂的相场模型。研究发现脱锂路径具有取向依赖性，导致非均匀相变与晶格失配应力 ... Per saperne di più
The purpose of this work is to show whether an important difference in Lithium solid concentration and electrolyte concentration can be observed in a Lithium-ion battery model, when considering either the Butler-Volmer kinetics or the Tafel kinetics for describing the electrode kinetics ... Per saperne di più
Dr. Bernardi is a Research Engineer with Ford Motor Company in Dearborn, MI. Her research focuses on the analysis and simulation of electrochemical energy-storage and conversion systems. In particular, Dr. Bernardi develops mathematical models that predict system behavior and identify ... Per saperne di più
The adoption of micro- and nanostructured electrodes is a promising technique to improve the performance of Li-ion battery, which increases the electrode surface area and improves the efficiency of ion exchange between the electrode and electrolyte. This performance improvement is ... Per saperne di più
With the Creation, roll-out, and maintenance of COMSOL Simulation apps, the role of simulation engineers and departments is expanding to include responsibilities similar to those of software developers. Within our department, we have undergone this transformation and will share the key ... Per saperne di più
Freeze-dried (lyophilized) drug products offer extended shelf life and improved drug stability within a range of combination products including autoinjectors and pre-filled syringes. A key step in the use of combination products is the reconstitution of the freeze-dried drug product (DP) ... Per saperne di più
A new method is proposed to study battery thermal behavior under nature convection condition, especially focusing on temperature rising and inhomogeneity of battery. Using porous electrode theory, an electrochemical and homogenization heat source thermal coupling model and an ... Per saperne di più
Lithium plating on the graphite anode is a significant factor contributing to the degradation of cell capacity, initiation of internal short circuits, and escalation of thermal runaway in lithium-ion batteries. Non-intrusive detection methods for lithium plating are critical for the safe ... Per saperne di più
This work is to present an implementation of COMSOL with MATLAB® [1] for the liquid cooling system of a battery pack based on the physics in COMSOL. The m.file of a model of battery module from COMSOL 4.2 is exported and modified to run in MATLAB®, as well as is managed by using another ... Per saperne di più
Solid Oxide Fuel Cells (SOFC) and Li-ion batteries (LIB) are electrochemical devices where performance is dependent on reactions inside porous electrode microstructures. Here we use tomographic techniques to probe 3D electrode structures (anodes and cathodes) at micro-nanometer length ... Per saperne di più
