Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
We consider the fluid dynamics problem of homogeneously filling a large tank by multiple inlets fed from a piping system. Suitable pipe geometries must be chosen so that the volume flow is constant for all inlets. In this work, we compare both for a piping system as depicted in fig. 1: A ... Per saperne di più
In this article we present Simulations results of an evaporation reactor for optical layer applications. The thermal simulation concern the source of the evaporated material. An experimental problem is ralated to the shape of the material powder surface: due to the evaporation rate, the ... Per saperne di più
This study deals with the 3D modeling of a light photocatalytic textile. This process aims to decontaminate industrial effluents such as water with pesticides. The present study describes the implementation of a reactive transport model in a computational fluid dynamics model developed ... Per saperne di più
Plasma reactors can be applied to the conversion of waste, biomass and fuels to synthesis gas (mixture of hydrogen and carbon dioxide) with efficiencies as higher as 90-95% and low energy demand, depending on the design optimization. In this work, a multi-step approach was applied to the ... Per saperne di più
In recent years, the optimization of high-temperature superconductors (HTS) has shown promising potential for developing advanced cable layouts aimed at the realization of practical fusion reactors. Despite their excellent performance in terms of electromagnetic and mechanical stability, ... Per saperne di più
Non-thermal plasma, generated in atmospheric pressure discharges, has been investigated in our laboratory in order to treat highly diluted (300 ppm to 1000 ppm) volatile pollutant. The collision of electrons created in the discharge with atmospheric air, leads to the formation of ... Per saperne di più
1 Problem Description Most studies for investigating heat and mass transfer phenomena in sorption storage systems use 1D or 2D numerical models. These are inadequate for analyzing processes in more complex geometries used in current prototypes. We present here a 3D model for the ... Per saperne di più
The annular reactor is a very useful design to carry many chemical reactions. In this study, COMSOL Multiphysics® software was used to study the isothermal mass transfer from the inner side of the outer tube of the annular reactor in the range of 200 Per saperne di più
Heterogeneous photocatalysis an advanced oxidation process (AOP) which in combination with a catalyst and UV irradiation completely mineralizes organic pollutants from water or gases into harmless compounds such as carbon dioxide (CO2) and water (H2O). Photocatalysis as a process is ... Per saperne di più
Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium to low-enriched uranium fuel are ongoing at ORNL as part of an effort sponsored by the U.S. Global Threat Reduction Initiative program. HFIR is a very high flux, ... Per saperne di più