Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Energy harvesting from environmental vibration nowadays is feasible because of natural oscillations like that caused by air or liquid flow and by exhalation or the heartbeat of a human body. This vibration frequency is typically low (in order of less than 1 kHz). Accordingly, low ... Per saperne di più
Over the past few decades, nano/micro-mechanical resonators have experienced tremendous improvements in measurement sensitivity. In order to ensure accuracy, it is crucial that each nano/micro-mechanical device is properly calibrated. Thermomechanical calibration provides a noninvasive ... Per saperne di più
Ultrasonic levitation is a novel technology for contactless handing of various objects. It is already used in various manufacturing processes where it is important to keep untouched surface. In this paper we introduce a model of so-called near-field ultrasonic levitation which allows ... Per saperne di più
This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... Per saperne di più
There has been growing demand for high performance micro sensors capable of detecting nuclear radiations being released from various industries, Nuclear reactors. Radiations emitted from the radioactive materials are invisible and not directly detectable by human senses. Thus it is ... Per saperne di più
Heterogeneous materials with different phases, are conductive and insulating (dielectric), and are physically present in different natural materials as e.g. atmospheric ice. Jonscher’s proposed ‘universal dielectric response’ is not sufficient for such materials, as it only reflects ... Per saperne di più
The silicon diaphragm is one of the most common structures in Micro-Electromechanical Systems (MEMS). However, it is susceptible to creep deformation at elevated temperatures. This paper presents a transient finite element model which simulates the mechanical behavior of the ... Per saperne di più
An FEA model of a steady state thermal interface material characterization apparatus was created in COMSOL Multiphysics 4.2a. This model was then fitted using three convection heat loss coefficients and the conductance of the TIM layer to a set of experimental measurements made using a ... Per saperne di più
Circuit board failures are often ignored because they could be impreceptible. This simulation examines how internal layers around a soldered pin via subject to temperature changes during the soldering process are affected, show the forces involved and determine breaking points. A 2D ... Per saperne di più
In this project, we report a design of MEMS microphone that is based on the application of porous silicon in improving the sensitivity of bulk micro machined capacitive pressure sensors. The property of a low Young’s modulus of porous silicon and its dependence on porosity have been ... Per saperne di più