Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
A three Dimensional model of the PEM Fuel cell is implemented using COMSOL Multiphysics and the channel width is varied to study the performance.Effect of channel width on the performance of the cell is studied by varying the width of the channel and keeping channel width to rib ratio ... Per saperne di più
A 3D finite element analysis is carried out, using COMSOL® software, to reproduce the thermal profile obtained with Rosenthal’s equation. The implemented heat transfer equation has been modified as a means to approximate Rosenthal’s solution. An analysis of the differences between the ... Per saperne di più
Introduction The topology optimization method is becoming increasingly popular as a design tool for multiphysics systems [1,2]. Topology optimization of fluid-thermal systems has been presented for example in [3] for forced convective heat transfer and in [4] for natural convection ... Per saperne di più
INTRODUCTION: Active cooling systems represent a possible solution to the electronics overheating that occurs in downhole tools operating on wireline, a cabling technology used to remotely control the downhole devices during oil and gas well interventions, in high temperature wells (150 ... Per saperne di più
A new experimental device has been developed in order to characterize the phase change material (PCM) thermal properties (thermal conductivity k, sensible and latent heat thermal energy storage, cp and Lf) in the solid phase, during the solid-liquid transition and in the liquid phase. It ... Per saperne di più
A three phase transformer with very low harmonic pollution transferred back to power line is here presented. In fact, thanks to the described setup, intermediate harmonics (5th and 7th) are not going out back to the power line feeding the primary. These results has been extensively ... Per saperne di più
With their small size, low manufacturing cost, fast transient response, and capacity to generate fluid power directly from small electrical power sources, microdevices incorporating electroosmostic flow (EOF) have wide-ranging applications, including newly developed high-performance ... Per saperne di più
Within a borehole a nozzle can be installed in order to increase the efficiency of fluid injection. The position of the nozzle is located near the perforated casing of an injection well. A COMSOL Multiphysics® model is set up for a typical nozzle design as applied in practice. The model ... Per saperne di più
The problem under investigation is electrical scale-up of a generic metallurgical process for primary metal production through resistive heating of slag by electric current, typically supplied by an AC three-phase system. Maxwell’s equations are analyzed revealing that the properties of ... Per saperne di più
Due to the inseparability of the wave equation, numerical methods are needed to develop an accurate electromagnetic model for various axisymmetric resonators such as micro-discs and micro-toroids. Our purpose is the implementation of a perfectly matched layer to determine the quality ... Per saperne di più