Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
A kernel of grain is modeled as an isothermal sphere, with descriptive differential equations scaled or rendered into non-dimensional form, where moisture transfer is governed by internal diffusivity, not by surface conditions. The time dependent problem is solved with COMSOL and the ... Per saperne di più
Gallium nitride (GaN) and its related nitride alloys with special physical properties are in technical areas of high interest. The growing of gallium nitride boules on non-native sapphire or silicon carbide requires complicated mechanisms of defect reduction in the lattice structure. ... Per saperne di più
The paper presents a student guide on how to implement surface to surface radiation within COMSOL Multiphysics® software for case studies found within the built environment. We included four benchmarks: (1) Radiation in a triangular cavity with infinite length; (2) Radiation between two ... Per saperne di più
In this work we report a numerical model of a Rotating Disk Electrode (RDE) voltammetry in a finite size domain. Thus, explaining the discrepancy of the diffusion coefficient obtained from the experimental rotating speed, with respect to the literature data. We achieved a very good ... Per saperne di più
This poster presents a numerical modeling approach for hygrothermal behavior of bio-based materials. The mathematical model describes the heat and moisture transfer through a wall of bio-based materials. The studied wall is subjected to both convective heat transfer and moisture flux ... Per saperne di più
The primary aim of using jet as mixer, like in case of other mixing devices, is to increase the heat and mass transfer between the phases. Beside the injection position the geometry of the jet mixer and the injection nozzle has a major effect on the injection. In our study COMSOL ... Per saperne di più
The historic Hofkeshuis in Almelo (The Netherlands) locates a unique work of art: three walls in the rear salon of the private house are covered with an 18th century series of painted wall hangings (Figure 1). The simple and similar pigmentation of the paintings, their original hanging, ... Per saperne di più
Self-heating is a problem to consider for Ultrasound Imaging probes. Since the probe is in contact with the skin, it’s necessary to find a solution to lower the front face temperature in order to avoid patient discomfort, even at the most demanding operating condition. One solution ... Per saperne di più
A number of medical and research applications require implantable devices to locally stimulate internal organs and communicate the internal vital signals to the outer world. Wireless power transfer (WPT) technique is used to supply power to these devices. The power is transferred ... Per saperne di più
Pioneering Computational Models for the Built Environment Energy performance is becoming more important in the build environment. With better insulated buildings, the possibility of moisture problems and thermal bridges increases. There for, it is not only important to determine the ... Per saperne di più