Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Magnetic levitation systems have been studied in the context of high-speed transportation as maglev trains, high speed machinery as magnetic bearings, and other similar engineering applications. In this paper, a three dimensional arbitrary shaped object is modeled and analyzed through ... Per saperne di più
This paper illustrates how to set up and solve a two-dimensional flow problem having dimensions of 640 x 320 micro-meter using the Navier-Stokes equations with the help of COMSOL Multiphysics solver. The principle of our pore-scale modeling approach is composed of two steps. The first ... Per saperne di più
A laboratory-scale fluorine reactor was simulated with COMSOL Multiphysics®. This model employs fundamental fully coupled electron-, heat-, mass- and momentum transfer (two-phase) equations to deliver a transient model of the above-mentioned reactor. Quasi-steady-state results were ... Per saperne di più
The complex behavior of biological prosthetic heart valves was simulated. A multiphysics computational approach was adopted using different modules of COMSOL Multiphysics: the LiveLink(TM) interface was used to exchange the valve geometry with CAD, Structural Mechanics Module to set ... Per saperne di più
In this study, the dam-break type two-dimensional gravitational collapse of rectangular granular piles in air was numerically studied. The frictional behavior of the material was based on the von-Mises model with the Mohr-Coulomb yield surface leading to pressure and strain-rate ... Per saperne di più
This paper reports the modelling and analysis of three dimensional negative dielectrophoretic traps for cell trapping applications. Dielectrophoresis is a well-established technique for cell analysis and cell trapping. Planar electrodes, at the bottom of a microfluidic channel, have been ... Per saperne di più
Composite behavior when undergoing to low energy impact has been investigated thorough modelling and simulation computation. We consider the dynamic impact among a small granular material piece and a large composite material body. Really, our investigation will to simulate the ... Per saperne di più
This research deals with the design of suitable microreactors for the catalytic oxidation of volatile organic compound (VOCs), using propane as a model molecule. The microreactor considered consists of eleven parallel channels, in which an Au/Cr/γ-Al2O3-catalyzed combustion reaction ... Per saperne di più
The extensional flow of viscoelastic flow is encountered during fibre spinning processes. A variety of polymers such as polyesters, polyacrylonitrile, rayon, acrylic, spandex etc are manufactured using this process. In the spinning process, polymer melt/ solution is extruded in the form ... Per saperne di più
Acoustic streaming (AS) describes a physical phenomenon where an oscillating sound emitter induces a steady fluid motion. Metal processing industry applies this treatment for grain morphology adjustments during the solidification of metal. Improvement and further development of this ... Per saperne di più
