Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.
Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.
Visualizza gli articoli presentati alla COMSOL Conference 2020
We studied the influence of a number of gas-liquid interface on the drag reduction effect by numeric simulation. Level set method was used for an analysis of gas-liquid interface. The analytic model is rectangular channel of height h = 5 micrometer and width w = 20 micrometer with two ... Per saperne di più
An electric micro-resistance sensor that can continuously measure the deformability of a single red blood cell (RBC) in a microchannel and a numerical model that can simulate the resistance and capacitance of the cell membrane and cytoplasm are developed and improved. The resistance ... Per saperne di più
This paper investigates the potential for a multidisciplinary approach using COMSOL Multiphysics for the evaluation of the tonal colouring of the Japanese koto (13-stringed zither). It uses Ando’s classic acoustic studies (1986; 1996) as a benchmark for the analysis of the natural ... Per saperne di più
The reciprocating paddle cell is a known practical method for depositing alloy films on wafer substrates. Recently, the mass transfer boundary layer within an industrial wafer plating cell was studied based on the measurement of limiting current. It was indicated that a shear-plate fluid ... Per saperne di più
There are two types of vertical axis wind turbine, drag-type and lift-type. Drag type wind turbine can rotate in low speed wind condition, although its rotation speed is low. Lift type wind turbine can rotate at higher speed, although it works only in high speed wind condition. This ... Per saperne di più
Numerical simulation of oxygen tension was performed to develop a microfluidic device for three-dimensional real-time observation of cellular response under hypoxia. The optimal experimental condition was obtained through investigations of effects of parameters, such as device thickness ... Per saperne di più
In transient analyses of electromagnetic fields with moving media, it is difficult to grasp the phenomena theoretically in the same manner of the convective heat diffusion since the treatment of the coupled problem with the field and dynamics must be necessary. In this presentation, we ... Per saperne di più
Electromagnetic waves in the terahertz (THz) region may be useful for non-destructive imaging and biosensing technology. This presentation shows the example of our research aimed at the development of application in the THz region. The result of comparing the FDTD method and COMSOL ... Per saperne di più
We are developing a reflective metal-insulator-metal (MIM) filter with narrow band absorption. In the MIM structure, the interaction between subwavelength multilayer and visible light, and the resultant surface plasmon resonance (SPR) in specific illumination conditions must be ... Per saperne di più
In order to perform rust surface treatment for stainless wires, we proposed an electrolyzing equipment to do so. It has the following advantages: safer, cheaper and less environmental pollution. To study the performance of the electrolyzing process, numerical simulation for electric ... Per saperne di più
