Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
钴基高温合金，因其优异的高温综合性能而被广泛应用于航空发动机制造等领域，激光增材制造是制造几何形状复杂的高温合金零件的有效途径。目前，高温合金增材制造中，缺陷与组织成分的控制是关键的技术瓶颈，而这两方面的问题都与熔池中的热质传输过程密切相关，因此我们将研究的方向着眼于揭示熔池流动背后复杂的物理现象。本研究基于 COMSOL 多物理场耦合，应用 ht、tpfmm、tcs 接口，提出了适用于高温合金多组分热质传输的数值模型，研究了温度梯度G以及凝固速率R对界面围观凝固组织的影响以及钴基合金中主要成分 Fe、C、Co、Cr 的传质特性以及成分分布 ... Per saperne di più
In the past decades, equilateral polygonal microcavity lasers with whispering-gallery modes (WGMs) have attracted great attentions due to their potential application in photonic-integrated circuits. Compared to the perfect microdisk without deformation, the polygonal microcavities such ... Per saperne di più
COMSOL Multiphysics was used to solve a phonon Boltzmann transport equation (BTE) for nanoscale heat transport problems. One dimensional steady-state and transient BTE problems were successfully solved based on finite element and discrete ordinate methods for spatial and angular ... Per saperne di più
A promising method for low cost production of efficient silicon thin film solar cells is the electron beam physical vapor deposition (EB-PVD) of high purity amorphous silicon (a-Si) layers with high deposition rates up to 300 nm/s [1] followed by crystallization. This study focuses on EB ... Per saperne di più
It is well-known that metal nanoparticles (NPs) excited at the plasmon frequency not only exhibit peculiar optical properties (e.g., a peak in the extinction spectrum, an enhanced electromagnetic near-filed) but also heat up [1]. This phenomenon is highly investigated for medical ... Per saperne di più
Understanding the air flow patterns and aerosol trajectories in ventilated rooms can provide key information for determining where to place early warning and monitoring instruments, and how to minimize hazardous materials in the worker’s breathing zone. The dispersion within rooms can be ... Per saperne di più
定量分析生物颗粒形态的变化可以为疾病诊断提供依据。例如血红细胞形态的变化常常会伴随有相应的血液疾病[1]，细胞的癌变常常伴随有细胞核形态的变化[2]等等。无标记的光学显微成像技术已经可以对生物颗粒的尺度和形状进行直接测量。光声显微成像技术 (PAM) 利用生物颗粒固有的吸光本领，已经可以对单个生物颗粒（如细胞和细胞器）进行成像[3]。 最近，光声流式仪(the photoacoustic flow-cytometry)已经实现了对单个生物颗粒进行连续检测[4]。然而，为了在大量的生物颗粒中快速检测生物颗粒的形貌，最好的方法是并非对其进行直接成像，而是采用高频光声显微技术 ... Per saperne di più
Optical tweezers work on the idea of non-contact Optical Pressure felt by transparent particles, when shined by coherent light source such as lasers. On the other hand when light falls on the metal it excites the electron inside it and make them free. When these free electron cloud ... Per saperne di più
Kejako is developing a non-invasive solution for demanding presbyopia patients seeking to keep their quality of life through the compensation of visual accommodation decay. The company has already developed the first and proprietary 3D parametric model of the complete eye. The model ... Per saperne di più
While low frequency light is poorly transmitted through an aperture in a conductive thin film, in the phenomenon known as extraordinary optical transmission (EOT), a narrow band of selected frequencies are transmitted when incident on an array of subwavelength periodic apertures where ... Per saperne di più