Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Charged particle accelerators require large dipole fields with stringent homogeneity requirements needed to bend particle beams without defocussing. Commonly superconducting saddle coil magnets are used with an iron core to enhance the bore field. The iron uneven magnetization brings ... Per saperne di più
A fully filled sphere of ferrofluid has constant demagnetizing factors in all three Cartesian directions such that when subjected to a uniform external rotating magnetic field the internal field is also uniform, and ultrasound measurements give no observable flow. Non-uniform magnetic ... Per saperne di più
A ferrofluid contains nanoscale ferromagnetic particles suspended in a carrier liquid. It is used in some high-power acoustic speakers to cool the drive coil. The ferromagnetic particles far from the heat source are attracted by the drive coil’s magnetic field. As the fluid approaches ... Per saperne di più
An interaction of aluminum aircraft skins with a laboratory-simulated, low-level, long-duration, continuing current representative of a natural lightning flash was modeled with COMSOL Multiphysics. For the analysis of the lightning direct effects on aircraft, the external environment is ... Per saperne di più
Passing alternating current through a wire placed just above a conducting surface induces eddy currents in that surface. Any cracks present in the conductor modify the eddy current distribution, creating a magnetic field signature unique to the crack. This magnetic signature can be ... Per saperne di più
Micro-power generators (MPGs) harvest and store small amounts of ambient energy. The motivation of this paper is to compare the MPG modeling and simulation results obtained from COMSOL Multiphysics® with those obtained using three other approaches: CoventorWare®, ANSYS® and ... Per saperne di più
A proximity DC current sensor using of a piezo sensed and actuated cantilever beam with a permanent magnet mounted at its free end is designed and simulated in COMSOL Multiphysics. The change in resonant frequency of cantilever is a measure of the current through the wire. The sensor is ... Per saperne di più
Three-dimensional finite element (FE) modeling of magnetic flux leakage (MFL) technique has been performed using COMSOL 3.4 for prediction of leakage fields from surface and sub-surface defects in a 12 mm thick carbon steel plate. The tangential and normal components of leakage fields ... Per saperne di più
Microfabricated planar interdigitated electrodes can detect and analyze cells or particles giving an impedance-based characterization. This method presents several advantages: real-time detection, label-free analysis, non-invasive sensing, easiness of integration and high-throughput ... Per saperne di più
Dr. R. N Singh is currently a INSA Senior Scientist. Prior to this appointment, he was a CSIR Emeritus Scientist at the National Geophysical Research Institute (NGRI), Hyderabad. He has been the Scientist-in-Charge of CSIR Centre of Mathematical Modeling and Computer Simulation, ... Per saperne di più