Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Electron-optical system (EOS) design for lithography provides the inherent advantage of higher resolution and maskless operation relative to optical technology. The use of multiple electron beams yields higher throughput, albeit with greater complexity in focusing, relative to the single ... Per saperne di più
Operation of a modified type microthrottle (MT) pump is analyzed by numerical simulation. Conventional MT pumps have disk type piezoelectric membranes while the analyzed type has a membrane of a rectangular shape. This could be advantageous in case the pump is stacked into an array for ... Per saperne di più
The developments of microsystems for biotechnology have been fast in the last few years, and no sign of slowing down is observed. It has begun with lab-on-chip for genomics, especially for the recognition of DNA sequences, followed by protein reactors and immunoassays, and today the ... Per saperne di più
Corona discharge is used in several applications such as surface treatment of polymers, photocopying or dust removal in air conditioning. Streamer formation is undesirable for most of these applications. Therefore, several studies have been dedicated to investigate the formation and ... Per saperne di più
Petroleum reservoir simulation is a process of modeling the complex physical phenomena inside a reservoir. This study presents an application of an analytical based numerical scheme so called the Boundary Element Method (DRBEM). It is proven to be able to provide a computationally ... Per saperne di più
During the hydraulic fracturing process, there can be possible re-activation of closed/sealed faults and natural fractures in the formation, which may lead to changes in the boundary conditions of the reservoir. While study models of shale gas formations have utilized the concept of a ... Per saperne di più
Objective of this paper is the development and implementation of a finite element model, in a COMSOL Multiphysics context, for the prediction of the aeroelastic behavior of rotor blades. In particular, the attention is focused on new generation blades characterized by curved elastic ... Per saperne di più
As a part of a lab-on-chip-device, more often it is required to measure dielectric constant of the fluid. For this purpose it is necessary to develop a sensor whose size is compatible with microfluidic channel. The work, presented in this paper, studies effect of the parameters ... Per saperne di più
We use 3D numerical models to analyze the ground deformation observed at Long Valley Caldera (LVC) between 1992 and 2000 via space-based geodetic techniques. More specifically, we implement a complex model that includes the topography and the material heterogeneities information of LVC. ... Per saperne di più
Self-heating is a problem to consider for Ultrasound Imaging probes. Since the probe is in contact with the skin, it’s necessary to find a solution to lower the front face temperature in order to avoid patient discomfort, even at the most demanding operating condition. One solution ... Per saperne di più