Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.
Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.
Visualizza gli articoli presentati alla COMSOL Conference 2025
Field-effect transistors (FETs) exhibit favourable characteristics for biological and chemical sensing applications, including multi-parameter response, tunable sensitivity, and inherent amplification [1], [2]. As sensors, FETs employ their gate or active channel as a sensing area, where ... Per saperne di più
A critical constraint in handling high power laser beams approaching 100kW of peak average power is thermal management due to laser absorption. Seurat Technologies uses a unique, optically addressed spatial light modulator (OASLM) with liquid crystals to dynamically shape laser beams for ... Per saperne di più
Artificial cascades for the electrochemical CO2 reduction reaction (CO2RR) to form value-added products are a developing technology, in which mass transport, reaction rates, local microenvironment and concentrations are all crucial parameters. These properties are highly dependent on the ... Per saperne di più
In this work, a 2.8x0.22 μm^2 silicon strip waveguide (n = 3.43 @4.234 μm) on a silica substrate (n = 1.38 @4.234 μm) and a superstrate with n = 1 was designed and evaluated through 2D (i.e., mode analysis), and 3D (i.e., wave propagation) analysis to strengthen the interaction between ... Per saperne di più
High average power lasers are currently being designed for laser fusion applications. Single beamlines with laser amplifiers should be able to deliver up to 10 kW average power at 10-Hz repetition rate. For achieving a 5 to 10 % wall-plug efficiency, this means that at least, 50 kW will ... Per saperne di più
The pursuit of artificial magnetism within metamaterials research has long been a focal point. Traditional methods rely on analyzing complex configurations such as arrays of subwavelength particles or split-rings, but unfortunately they fail at subwavelength scales. Revisiting Mie theory ... Per saperne di più
Efficient mixing and pumping of liquids at the microscale is a technology that is still to be optimized. The combination of an AC electric field with a small temperature gradient leads to a strong electrothermal flow that can be used for multiple purposes. Combining simulations and ... Per saperne di più
In the rapid development cycle of sensor systems, minimizing time-to-market is crucial. However, designing a new MEMS-chip (Micro-Electro-Mechanical Systems) presents significant challenges due to the extensive time required for manufacturing and characterization. This delay affects the ... Per saperne di più
