Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo

In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.


Visualizza gli articoli presentati alla COMSOL Conference 2020

MEMS and Nanotechnologyx

Finite Element Analysis of Planar Microcoil Based Induction-balance Magnetic MEMS Sensor

Krishnapriya S1, Suja K J2, Rama Komaragiri3
1Department of ECE. Muthoot Institute of Technology, India
2NIT Calicut, Calicut, Kerala India
3Bennett University, Greater Noida, Uttar Pradesh, India

Two transmitting planar microcoils (TX1, TX2) and one receiving microcoil (RX) are employed as shown in Fig.1 formed in induction-balance configuration. RX-Coil is positioned in such a way to achieve primary field suppression in RX-Coil’s region. Meaning, a magnetic cavity is created in ... Per saperne di più

Optimization of Microfabricated 2D Planar Spiral Microcoils for the Micro NDT of Grinding Burn

Isman Khazi1, Andras Kovacs1, Rui Zhu1, Ulrich Mescheder1
1Institute for Microsystem Technology(iMST), Furtwangen University, 78120 Furtwangen, Germany

Cylindrical grinding has become an integral part of machining of workpieces with an ultra-high precision and higher throughput. The grinding process involves the mechanical interaction of the grinding blade with the workpiece at relatively higher rotation speeds, with a higher energy ... Per saperne di più

Multiphysics Simulation of Internal Discharge in Nanodielectric

F. Alam1, MA. Rab2
1UnitedHealth Group, Minneapolis, MN, USA
2Norfolk State University, Norfolk, VA, USA

This research work investigates the effect of inclusion of small amount (0%, 2% and 6%) of natural Nano fillers on the internal field properties and discharge characteristics of polypropylene films. 3D Models are built to simulate field properties and internal charge in natural ... Per saperne di più

3D Modeling of Nanocomposites

MA. Rab1, F. Alam2
1Norfolk State University, Norfolk, VA, USA
2UnitedHealth Group, Minneapolis, MN, USA

Current research focus on improvement of electrical, mechanical, surface characteristics of polypropylene films by incorporation of nanoparticles into the polymer matrix of the film. We built 3D model of polypropylene Nanocomposites made of polypropylene matrix and incorporating various ... Per saperne di più

Thermomechanical Properties of Elastomeric Stamps for Micro-Transfer Printing Applications

C. Reyes1, K. Oswalt 1, J. Thostenson1, J. Roe1, D. Gomez1
1X-Celeprint, Durham, NC, USA

Micro-transfer printing (MTP) enables mass-transfer of wafer-level chips having lateral dimensions ranging from 3 x 7 um to 650 x 650 um to a nonnative substrate. This is accomplished with an elastomeric stamp containing micrometer scale posts that have been precisely defined using ... Per saperne di più

Silicon Nitride Corrugated Membrane with High-Width-Aspect-Ratio for MEMS Microphones

Shubham1
1Knowles Electronics, Itasca, IL, USA

Micro-Electro-Mechanical Devices such as acoustics sensors, finger print sensors, tunable capacitors etc. are widely used in commercial applications. The pressure sensors use membranes which deflect upon applied pressure load. The most important aspect of any pressure sensor is its ... Per saperne di più

Simulation of a Scaled-up Deformable Mirror System Driven by MEMS-Based Lorentz Actuator Arrays

B. Park1, A. J. Bergren1, M. Belov1, G .Burley2, C. Shafai3
1Nanotechnology Research Centre, Edmonton, Canada
2NRC-Herzberg Astronomy & Astrophysics, Victoria, BC, Canada
3Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB, Canada

This paper presents the design and simulation results of a MEMS-actuated deformable mirror (DM) consisting of a 20 × 20 Lorentz-force actuator array bonded to a flexible mirror. The DM is the critical component of an Adaptive Optics (AO) system targeted for ground-based telescope ... Per saperne di più

Electrostatic Zipping Actuation of a Three-Chamber Peristaltic Micropump

A. Eden1, S. MacKenzie1, D. Huber1, S. Pennathur1, S. Stettler2
1University of California, Santa Barbara, Santa Barbara, CA, USA
2University of California, Santa Barbara, Santa Barbara, CA, USA and Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland

While electrostatic actuators feature prominently among the most widely employed classes of actuators for microelectromechanical systems (MEMS), conventional embodiments of these devices (e.g., parallel plate structures) notoriously suffer from several significant drawbacks. Most ... Per saperne di più

Finite Element Modeling of an AlGaN/GaN Based VOC Sensor Using COMSOL®

B. Uppalapati1, G. Koley1, A. Kota2
1Clemson University, Clemson, SC, USA
2University of Dayton, Dayton, OH, USA

Volatile organic compounds (VOCs) are a large group of chemicals that can be found in many products that we use to build and maintain our homes. Some of the VOCs such as benzene, formaldehyde, ethylene glycol, etc. can be found in our everyday life in the form of paints, cleaning agents, ... Per saperne di più

Understanding the Physics of Droplet Electrocoalescence in a Microtrap

B. Koppolu1, S. P. Burugupally1, F. B. Memon1
1Wichita State University, Wichita, KS, USA

Droplet-based microfluidic systems are emerging as an ideal platform for the high-throughput screening of eukaryotic cells aimed to understand the complex, multidimensional, and dynamic biological processes [1]. Here, two aqueous droplets – each containing a eukaryotic cell – suspended ... Per saperne di più