Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.
Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.
Visualizza gli articoli presentati alla COMSOL Conference 2025
Innovations in air-conditioning and other forms of cooling or ventilation can be viewed as technological solutions improving environmental conditions that are beneficial for human health, comfort and productivity. This study deals with a thermal and fluid-dynamics investigation of ... Per saperne di più
Hazardous for the transmission lines is not only the static ice load, but also the aerodynamic instability of iced cables. It can lead to large amplitude oscillations at low frequencies. Also, twisting due to asymmetrical iced cables may increase the fatigue rate. In extreme events, ... Per saperne di più
Geothermal systems represent a large resource that can provide, with a reasonable investment, a very high and cost-effective power generating capacity. Despite its unquestionable potential, geothermal exploitation has long been perceived as limited, mainly because of the dependence from ... Per saperne di più
The use of ventilated facades may reduce the cooling and heating energy demands of the building. Double-skin facades (DSFs) belong to the wider group of ventilated facades and currently represent one of the most interesting and studied facade systems. The purpose of this study is to ... Per saperne di più
Borehole heat exchangers (BHE) in connection with heat pumps and floor heating in many countries are becoming an alternative to conventional heating or cooling systems using fossil resources. We describe how 1D components for heat transport in pipes can be coupled with a 2D or 3D ... Per saperne di più
Within a borehole a nozzle can be installed in order to increase the efficiency of fluid injection. The position of the nozzle is located near the perforated casing of an injection well. A COMSOL Multiphysics® model is set up for a typical nozzle design as applied in practice. The model ... Per saperne di più
Electric power, in cities or for power plant outflow, is most often transmitted through underground cables. Due to increased electricity demands power suppliers make large investments to house these cables in deep or shallow tunnels. The thermal environment is complex, with different ... Per saperne di più
A non-newtonian oil dispersion in a pulsed flow pipe system was mixed in a circulation loop pipe with custom-made static mixers. The rotor-pump was used in a non-pulsed flow circulation, and diaphragm pump for pulsed flow circulation. Modeling was done using COMSOL Multiphysics® 4.3b. ... Per saperne di più
In this paper, implicit Large Eddy Simulation (LES) based on finite-element analysis is performed in order to investigate two-dimensional circular cylinder incompressible flow. Implicit LES attempts time-dependent flow computation with no explicit turbulence model. Here, two types of ... Per saperne di più
The rapid development of electronic devices leads to more demand for efficient cooling techniques. Porous media represent a convincing passive cooling enhancer due to its large contact surface area to volume ratio and intense mixing of fluid flow. In the present work, numerical studies ... Per saperne di più
