Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper

Scopri come la simulazione multifisica viene utilizzata in tutto il mondo per ricerca e sviluppo

La modellazione e simulazione multifisica favorisce l’innovazione in numerosi settori industriali e nel mondo accademico, come dimostrano le molteplici applicazioni illustrate negli articoli tecnici e nei poster presentati ogni anno da ingegneri, ricercatori e scienziati alla COMSOL Conference.

Lasciati ispirare dai recenti contributi raccolti qui sotto oppure, per trovare una presentazione specifica o filtrare i risultati per area di applicazione, anno o sede della conferenza, utilizza lo strumento di Ricerca Rapida.

Visualizza gli articoli presentati alla COMSOL Conference 2026

Search Term:

AC/DC Electromagnetics

Modeling of Piezoelectric Transducers Made of PZT for Energy Harvesting

J. Golebiowski [1], P. Bakolik [2],
[1] Lodz University of Technology, Department of Semiconductor and Optoelectronics Devices, Poland
[2] Lodz Univeristy of Technology, Poland

This work shows the results of modeling of piezoelectric transducers used to recover energy from mechanical vibrations. The analysis consists of usefulness of commercial ceramic PZT transducers to power electronic systems. Determined output load characteristics, characteristics of the ... Per saperne di più

Investigation of Ion Interactions and Space Charge Effects in a Time of Flight Ion Trap Resonator

D. Bayat [1], I. Kjelberg [1], G. Spinola Durante [2], D. Schmid [3]
[1] CSEM SA, Neuchatel, Switzerland
[2] CSEM SA, Alpnach, Switzerland
[3] CSEM SA, Landquart, Switzerland

An ion trap resonator, used for mass spectrometry, is investigated. Simulations are used to define the stabilization criterion of ion trajectories by optimization of the electrode configurations. The ion interactions are investigated and shown to help in reduction of ion-diffusion. Space ... Per saperne di più

Effect of Pollution Layer Thickness on Electric Field Distribution along a Polymeric Insulator

Arshad [1], A. Nekahi [1], S. McMeekin [1], M. Farzaneh [2]
[1] School of Engineering and Built Environment, Glasgow Caledonian University, United Kingdom
[2] Canada Research Chair on Atmospheric Icing Engineering of Power Networks (INGIVRE), Université du Québec à Chicoutimi, QC, Canada

Electric field distributions along a polymeric insulator under wet and contaminated conditions were studied in this paper. To study the effect of pollution layer conductivity and thickness on the electric field distribution along a standard polymeric insulator, simulations were carried ... Per saperne di più

Influence of Voltage Type and Polarity on Electric Field Distribution Along a Polymeric Insulator

Arshad [1], Dr. A. Nekahi [1], S. McMeekin [1], M. Farzaneh [2]
[1] School of Engineering and Built Environment, Glasgow Caledonian University, United Kingdom
[2] Canada Research Chair on Atmospheric Icing Engineering of Power Networks (INGIVRE), Université du Québec à Chicoutimi, QC, Canada

Electric field distribution along an insulator surface is of prime importance for the long term performance of insulators. In this paper electric field and potential distribution along a standard 33 kV polymeric insulator were investigated under different pollution conditions. Effect of ... Per saperne di più

Implicit Large Eddy Simulations of 2D Flow and Heat Transfer in Thermoacoustic Resonators

N. Martaj [1,2], S. Savarese [3], S. Kouidri [3], M. M. ALI [4,5]
[1] EPF Ecole d’ingénieurs, Montpellier, France
[2] Institut d'Electronique et des Systèmes, Université de Montpellier, Montpellier, France
[3] Armélio, Les Ulis, Courtabœuf, France
[4] LIMSI-CNRS, Orsay, France
[5] UPMC Univ Paris 06, Paris, France

The reduction of energy consumption in the building sector (nearly 40% of the energy consumption in Europe) is a real challenge to achieve the objective of the “2020 European climate and energy package”. In recent years, great interest is observed for the Stirling thermoacoustic ... Per saperne di più

Parametric Simulation of PZT Diameter to Hole Ratio for Optimized Membrane Displacement

A. Arevalo [1], D. Castro [1], D. Conchouso [1], I. G. Foulds [2]
[1] Computer, Electrical and Mathematical Sciences and Engineering (CEMSE), King Abdullah University of Science and Technology (KAUST), Saudi Arabia
[2] The University of British Columbia, School of Engineering, Okanagan Campus, Saudi Arabia

For our simulation we used the Piezoelectric Devices interface. The structure was set with (clamped) fix constraint boundaries to both ends. The bottom electrode was set to be the ground for the electrostatic physics and the top electrode was set to be a Terminal with potential of 10V. A ... Per saperne di più

Toroidal Spring Coil: Displacements & Stress Analysis to Detect the Sealing Parameters

V. Riccardi [1],
[1] Cesare Bonetti, Garbagnate Milanese, Italy

The aim of the simulation is to study the behavior of a particular arrangement of a sealing system made of a Toroidal Spring Coil encapsulated in an thin casing, which is provided with a circumpherential cut to permit the pressure fill it inside. The mechanical simulation implemented ... Per saperne di più

Simulation of the Earth's Electromagnetic Clearance System (DEMETER)

J. P. Pothin [1], N. Gosselin [1],
[1] Nexter Systems, France

DEMETER is a magnetic field replicator. This system is designed to deceive anti tank mines. Numerical simulation (using COMSOL Multiphysics® software) allows to indicate DEMETER's performance in various environment and various configurations. The study of the magnetic field provide also ... Per saperne di più

Primo

531–538 of 872

Prossimo

Ultimo