Presentazioni e Articoli Tecnici

Ricerca rapida

Risorse

White paper

Alla COMSOL Conference 2026, ingegneri, ricercatori e scienziati di tutto il mondo hanno presentato il loro lavoro di simulazione, con applicazioni in tutti i principali settori industriali e nel mondo accademico. Utilizza lo strumento di ricerca rapida per trovare una presentazione specifica oppure filtra i contenuti per argomento o sede dell’evento.

Search Term:

2016 - All

Maximizing the Fatigue Crack Response in Surface Eddy Current Inspections of Aircraft Structures

C. Mandache [1], T. Theodoulidis [2],
[1] National Research Council Canada, Ottawa, ON, Canada
[2] University of Western Macedonia, Kozani, Western Macedonia, Greece

In-service detection of fatigue cracking in metallic aerospace structures relies on capable and efficient eddy current inspection procedures. For best results, inspections with surface scanning eddy current techniques are following rigorous procedures that indicate the instrument ... Per saperne di più

Modeling the Acoustic Scattering from Objects Buried in Porous Sediment Using COMSOL Multiphysics® Software

A. Bonomo [1], M. Isakson [1],
[1] Applied Research Laboratories, The University of Texas at Austin, Austin, TX, USA

A frequency-domain finite element (FE) technique for computing the acoustic scattering from axially symmetric fluid-loaded structures subject to a nonsymmetric forcing field based on Ref. 1 is extended to poroelastic media and implemented in COMSOL Multiphysics® software. This method ... Per saperne di più

Theoretical and Experimental Validation of Micro Hot Embossing on Polymeric Substrates

F. Lai [1], N. K. Shivaprakash [1], J. Zhang [1], A. Panwar [1], J. Mead [1], C. Barry [1], Q. Truong [2],
[1] University of Massachusetts Lowell, Lowell, MA, USA
[2] US Army Natick Soldier Research, Development and Engineering Center, Natick, MA, USA

Micro hot embossing on a large area polymeric substrates using roll-to-roll (R2R) mode has been considered as one of the most promising technologies that can offer continuous fabrication of large area polymeric substrates. Besides continuous operation, roll-to-roll (R2R) process offers ... Per saperne di più

A COMSOL Multiphysics® Software Analysis of Beam Tube Cooling in the High Flux Isotope Reactor of ORNL

J. D. Freels [1],
[1] Research Reactors Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA

Previous to the present work, a formal calculation was approved [1,2] to support the operation of the High Flux Isotope Reactor (HFIR) Horizontal Beam-Tube 1 of 4 (HB-1). The present calculation [3,4] repeats the previous work using COMSOL Multiphysics® software and extends the analysis ... Per saperne di più

Multiphysics Analysis of RF Cavities for Particle Accelerators: Perspective and Overview

M. Awida [1],
[1] Fermi National Particle Accelerator Laboratory, Warrenville, IL, USA

Particle accelerator technology evolves gradually towards improving reliability and efficiency of the accelerator machines, which would reduce their cost for current applications and even make them more accessible to new industrial applications. RF cavities are utilized in particle ... Per saperne di più

Genetic Algorithm for Geometry Optimization of Optical Antennas

R. Diaz de Leon [1], G. Gonzalez [1], A. G. Rodriguez [1], E. Flores [2], F. J. Gonzalez [1],
[1] Universidad Autonoma de SLP, San Luis Potosi, S.L.P., Mexico
[2] Instituto Tecnologico de SLP, San Luis Potosi, S.L.P., Mexico

A genetic algorithm was programmed in MATLAB® software and linked to the COMSOL Multiphysics® software with the COMSOL LiveLink™ for MATLAB® to optimize the geometry of an optical antenna (nanoantenna). The proposed computational model demonstrated that nanoantenna geometries does not ... Per saperne di più

FEM Analysis and Optimization of Electro-Stimulating Implants for Bone Regeneration and Prevention of Bacterial Infection

T. Bender [1], J. Ziebart [2], T. J. Dauben [1], B. Kreikemeyer [3], R. Bader [2]
[1] Institute of Medical Microbiology, Virology and Hygiene, Rostock University Medical Center, Rostock, Germany; Research Laboratory for Biomechanics and Implant Technology, Department of Orthopedics, Rostock University Medical Center, Rostock, Germany
[2] Research Laboratory for Biomechanics and Implant Technology, Department of Orthopedics, Rostock University Medical Center, Rostock, Germany
[3] Institute of Medical Microbiology, Virology and Hygiene, Rostock University Medical Center, Rostock, Germany

The aim of this study is to investigate the influence of electro-magnetic stimulation on bone regeneration and the effect on bacterial infection. Electro-magnetic stimulation is a promising technique and a powerful tool for the enhancement of bone regeneration. To optimize the amplitude ... Per saperne di più

Thermomechanical Design of a Gas Turbine Reheat Combustor Experiment Using FEM Analysis with the COMSOL Multiphysics® Software

F. M. Berger [1], M. Eser [1], T. Sattelmayer [1],
[1] Lehrstuhl für Thermodynamik, Technical University of Munich, Munich, Germany

Enhanced operational flexibility and low levels of pollutant emissions are achieved with a sequential arrangement of premixed combustion stages in gas turbines for power generation. In the second – reheat – combustion stage, hot flue gases of approximately 1500K are enriched with fuel ... Per saperne di più

Primo

281–288 of 426

Prossimo

Ultimo

Presentazioni e Articoli Tecnici

Ricerca rapida

COMSOL Conference 2026 Proceedings

Collection of Papers, Posters, and Slideshows Accepted by the Program Committee